Garmin G1000H Bell 407GX Pilot's Guide - Page 447
Disable/Enable Iridium Transceiver, Garmin G1000H, Pilot's Guide for the Bell 407GX
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 447 highlights
ADDITIONAL FEATURES DISABLE/ENABLE IRIDIUM TRANSCEIVER Iridium telephone and data communications may be turned on or off by performing these simple steps. Disabling/enabling telephone and low speed data services: 1) Turn the large FMS Knob on the MFD to select the AUX page group. 2) Turn the small FMS Knob to select REPORTS/DATA LINK. 3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is now displayed as shown in Figure 8-76. Figure 8-76 Report Status Page 4) Press the MENU Key. The Page Menu window is now displayed as seen in Figure 8-77. 5) Turn the FMS Knob to select 'Disable Iridium Transmission' in the menu list. Figure 8-77 Select Disable Iridium Transmission 6) Press the ENT Key. The Iridium transceiver is now disabled. 7) To enable the Iridium transceiver, repeat steps 1 through 4, then select 'Enable Iridium Transceiver'. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 435