Garmin G1000H Bell 407GX Pilot's Guide - Page 191

Navigation Map Showing Selected User Waypoint FLIGHT MANAGEMENT Nearest User Wpt List - Identifier - Bearing/Distance from aircraft position Selected User Waypoint User Waypoint Info - Comment - Lat/Long Reference Wpt Info - Identifier - Radial/Distance Figure 5-45 Nearest User Waypoint Page CREATING USER WAYPOINTS User waypoints can be created from the User Waypoint Information Page in the following ways: Creating user waypoints from the User Waypoint Information Page: 1) Select the NEW Softkey, or press the MENU Key and select 'Create New User Waypoint'. 2) Enter a user waypoint name (up to six characters). 3) Press the ENT Key. The current aircraft position is the default location of the new waypoint. 4) If desired, define the type and location of the waypoint in one of the following ways: a) Select "RAD/RAD" using the small FMS Knob, press the ENT Key, and enter the two reference waypoint identifiers and radials into the REFERENCE WAYPOINTS window using the FMS Knobs. Or: b) Select "RAD/DIS" using the small FMS Knob, press the ENT Key, and enter the reference waypoint identifier, the radial, and the distance into the REFERENCE WAYPOINTS window using the FMS Knobs. Or: c) Select "LAT/LON" using the small FMS Knob, press the ENT Key, and enter the latitude and longitude into the INFORMATION window using the FMS Knobs. 5) Press the ENT Key to accept the new waypoint. 6) If desired, change the storage method of the waypoint to "TEMPORARY" or "NORMAL" by moving the cursor to "TEMPORARY" and selecting the ENT Key to check or uncheck the box. 7) Press the FMS Knob to remove the flashing cursor. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 179