Garmin G1000H Bell 407GX Pilot's Guide - Page 229
Garmin G1000H, Pilot's Guide for the Bell 407GX, Entering an along track offset distance, ATK OFST
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
FLIGHT MANAGEMENT entered from 1 to 99 nm in increments of 1 nm. Entering a negative offset distance results in an along track offset waypoint inserted before the selected waypoint, whereas entering a positive offset distance results in an along track offset waypoint inserted after the selected waypoint. Multiple offset waypoints are allowed. A waypoint must be adjacent to its parent waypoint in the flight plan, so the system limits the along-track distance to less than the length of the leg before or after the selected waypoint. If the selected waypoint is the active waypoint, the distance is limited to less than the distance to go to the active waypoint. Assigning an along track offset to a leg with indeterminate length is not permitted. An along track offset is not allowed at or after the final approach fix of an approach. An along track offset distance cannot be modified once entered. If the along track offset distance must be changed, the existing along track offset waypoint must be deleted and a new one created with the new offset distance. Along Track Offset Waypoint and Distance Along Track Offset Waypoint and Distance from Flight Plan Waypoint Figure 5-77 Along Track Offset Entering an along track offset distance: 1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD). 2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight the waypoint for the along track offset. 3) Press the ATK OFST Softkey (MFD only); or press the MENU Key, highlight 'Create ATK Offset Waypoint', and press the ENT Key. 4) Enter a positive or negative offset distance in the range of +/- 1 to 99 nm (limited by leg distances). 5) Press the ENT Key to create the offset waypoint. 6) Turn the small FMS Knob to enter the desired altitude for the offset. 7) Press the FMS Knob to remove the flashing cursor. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 217