Garmin G1000H Bell 407GX Pilot's Guide - Page 438
FliteCharts Cycle Number and Expiration Date, Power-up FliteCharts Database
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 438 highlights
ADDITIONAL FEATURES FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the cycle expiration date to the disables date. FliteCharts are disabled 180 days after the expiration date and are no longer available for viewing upon reaching the disables date. When turning on the system, the Power-up Page displays the current status of the FliteCharts database. See the table below for the various FliteCharts Power-up Page displays and the definition of each. FliteCharts Database Figure 8-67 Power-up Page, FliteCharts Database Power-up Page Display Definition Blank Line. System is not configured for FliteCharts. Contact a Garmin-authorized service center for configuration. System is configured for FliteCharts but no chart database is installed. Refer to Updating Garmin Databases in Appendix B for the FliteCharts database. Normal operation. FliteCharts database is valid and within current cycle. FliteCharts database is beyond the expiration date, but still within the 180 day viewing period. FliteCharts database has timed out. Database is beyond 180 days after expiration date. FliteCharts database is no longer available for viewing. Table 8-3 FliteCharts Power-up Page Annunciations and Definitions Other possible AUX - System Status page conditions are shown in Figure 8-68. 'FliteCharts Expires' plus a date in white, indicates the chart database is current. 'Chart data is out of date!' in yellow, indicates charts are still viewable, but approaching the disable date. 426 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A