Garmin G1000H Bell 407GX Pilot's Guide - Page 153
Garmin G1000H, Pilot's Guide for the Bell 407GX, Configuring automatic zoom
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
FLIGHT MANAGEMENT • The 'time out' time (configurable on the Map Setup Page for the Map Group) determines how long auto zoom is overridden by a manual adjustment of the range knob. At the expiration of this time, the auto zoom range is restored. Setting the 'time out' value to zero causes the manual override to never time out. • When the maximum 'look forward' time is set to zero, the upper limit becomes the maximum range available (2000 nm). • When the minimum 'look forward' time is set to zero, the lower limit becomes 1.5 nm. Auto Zoom: Off, MFD Only, PFD Only, All On Manual Range Override Expiration Time Maximum Look Forward Time Minimum Look Forward Time Figure 5-7 Map Setup Menu Window - Map Group, Auto Zoom Configuring automatic zoom: 1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option. 2) Press the ENT Key. The Map Setup Menu is displayed. 3) Select the 'Map' group. 4) Press the ENT Key. 5) Highlight the 'AUTO ZOOM' field. 6) Select 'Off', 'MFD Only', 'PFD Only', or 'ALL On'. 7) Press the ENT Key to accept the selected option. The flashing cursor highlights the 'MAX LOOK FWD' field. Times are from zero to 999 minutes. 8) Use the FMS Knobs to set the time. Press the ENT Key. 9) Repeat step 8 for 'MIN LOOK FWD' (zero to 99 minutes) and 'TIME OUT' (zero to 99 minutes). 10) Press the FMS Knob to return to the Navigation Map Page. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 141