Garmin G1000H Bell 407GX Pilot's Guide - Page 332

HAZARD AVOIDANCE At the completion of a successful weather data request, the request status window (if still open) will indicate 'OK'. Cancelling a GFDS Weather Data Request in Progress: 1) Select the Weather Data Link (GFDS) Page. 2) Press the MENU Key. 3) With 'GFDS Data Request' highlighted, press the ENT Key. 4) Turn the large FMS Knob to select 'CANCEL REQ' and press the ENT Key. The request status box indicates 'Request Cancelled'. 5) Press the FMS Knob to return to the Weather Data Link (GFDS) Page. The pilot can schedule GFDS data requests to recur automatically. Auto requests remain enabled until the pilot disables them, or the G1000H power is cycled. The Request Status window will indicate a countdown timer until the next automatic data request occurs. NOTE: If automatic GFDS data requests were enabled prior to the system entering Reversionary Mode, the automatic weather data requests will continue in Reversionary Mode, however the GFDS Data Request window and its associated options will not be available. Enabling/disabling automatic GFDS Data Requests: 1) Select the Weather Data Link (GFDS) Page. 2) Press the MENU Key. 3) With 'GFDS Weather Request' highlighted, press the ENT Key. 4) Choose the desired weather coverage options. 5) Turn the large FMS Knob to select the 'UPDATE RATE' setting. Then turn the small FMS Knob to highlight the desired automatic update frequency (OFF, 5 Min, 10 Min, 15 Min, 20 Min, 25 Min, 30 Min, 45 Min, or 60 Min), then press the ENT Key. 6) The 'SEND REQ" button is highlighted and a countdown timer is displayed in the 'REQUEST STATUS' based on the currently selected update rate. Press the ENT Key to immediately send an immediate GFDS Data Request. Or: Press the FMS Knob to return to the Weather Data Link (GFDS) Page. 320 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A