Garmin G1000H Bell 407GX Pilot's Guide - Page 70
Garmin G1000H, Pilot's Guide for the Bell 407GX, Changing the navigation angle setting
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
FLIGHT INSTRUMENTS Navigation angles (track, heading, course, bearing) are set on the AUX - System Setup Page and are either corrected to the computed magnetic variation ('Mag Var'), referenced to true north (denoted 'T'), or corrected according to user input (denoted 'U'). When an approach referenced to true north has been loaded into the flight plan, the system generates a message to change the navigation angle setting to 'True' at the appropriate time. Figure 2-18 Heading and Course Indications (True) Figure 2-19 Heading and Course Indications (User) Changing the navigation angle setting: 1) Use the FMS Knob to select the AUX - System Setup Page on the MFD. 2) Press the FMS Knob to activate the cursor. 3) Turn the large FMS Knob to highlight 'Nav Angle' in the 'Display Units' box. 4) Turn the small FMS Knob to highlight the desired setting and press the ENT Key. • TRUE - References angles to true north (denoted with 'T') • MAGNETIC - Angles corrected to the computed magnetic variation ('Mag Var') • USER - Angle set according to user input Figure 2-20 Navigation Angle Settings (AUX - System Setup Page) 58 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev A