Garmin G1000H Bell 407GX Pilot's Guide - Page 330

HAZARD AVOIDANCE • DESTINATION - Requests data based on the active flight plan destination (Direct-To destinations excluded). See the Flight Management section for more information about entering and activating flight plans. • FPL - Requests data along an active flight plan, if one exists. Turn the small FMS Knob to select the desired flight plan look-ahead distance option (or choose 'REMAINING FPL' to request the remainder of the flight plan), then press the ENT Key. • WAYPOINT - Requests data based on a waypoint (which may be off-route). Turn the large and small FMS Knobs to enter a waypoint, then press the ENT Key. 5) Turn the large FMS Knob highlight to the 'DIAMETER / RTE WIDTH' (diameter/route width) distance field and turn the small FMS Knob to select the desired diameter and route width of the request, then press the ENT Key. 6) Turn the large FMS Knob until the 'SEND REQ' button is highlighted. Press the ENT Key to initiate the request immediately or press the FMS Knob to return to the Weather Data Link (GFDS) Page without requesting weather data. Figure 6-53 Weather Data Link (GFDS) Page Menu Figure 6-54 GFDS Data Request Window 318 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A