Garmin G1000H Bell 407GX Pilot's Guide - Page 309

HAZARD AVOIDANCE CELL MOVEMENT Cell Movement data (Figure 6-20) shows the location and movement of storm cells as identified by the ground-based system. Cells are represented by yellow squares, with direction of movement indicated with short, orange arrows. Storm Cells Figure 6-20 Cell Movement Data On most applicable maps, Cell Movement data is selected for display along with NEXRAD. On the Weather Data Link (XM) Page, Cell Movement data can be selected independently. Cell Movement data can be displayed on the following maps: • PFD Inset Map • AUX - Trip Planning Page •Navigation Map • Nearest Pages Displaying Cell Movement information: 1) Select the MAP Softkey (for the PFD Inset Map, select the INSET Softkey). This step is not necessary on the Weather Data Link (XM) Page. 2) Select the NEXRAD Softkey (CEL MOV Softkey on the Weather Data Link (XM) Page). For Cell Movement to be displayed on maps other than the Weather Data Link (XM) Page, Cell Movement must be turned on in the Navigation Map Setup Menu (see "Setting Up XM Satellite Weather"). To display the Cell Movement legend on the Weather Data Link (XM) Page, (Figure 6-21), select the LEGEND Softkey when Cell Movement is selected for display. Figure 6-21 Cell Movement Legend 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 297