Garmin G1000H Bell 407GX Pilot's Guide - Page 44
Garmin G1000H, Pilot's Guide for the Bell 407GX, Set the system time format
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
SYSTEM OVERVIEW Figure 1-28 System Setup 2 Page Date/Time The Date/Time Box on the System Setup 1 Page displays the current date and time and allows the pilot to set the time format (local 12-hr, local 24-hr, or UTC) and offset. The time offset is used to define current local time. UTC (also called GMT or Zulu) date and time are calculated directly from the GPS satellites signals and cannot be changed. When using a local time format, designate the offset by adding or subtracting the desired number of hours. Set the system time format: 1) While on the System Setup 1 Page, press the FMS Knob momentarily to activate the flashing cursor. 2) Turn the large FMS Knob to highlight the time format field in the Date/Time Box. 3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the ENT Key. Set the current time offset: 1) While on the System Setup 1 Page, press the FMS Knob momentarily to activate the flashing cursor. 2) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box. 3) Turn the FMS Knobs to enter the time offset and press the ENT Key. 32 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A