Garmin G1000H Bell 407GX Pilot's Guide - Page 160
Topography, Displaying/removing topographic data TOPO DATA using the Navigation Map Menu
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
FLIGHT MANAGEMENT TOPOGRAPHY All navigation maps can display various shades of topography colors representing land elevation, similar to aviation sectional charts. Topographic data can be displayed or removed as described in the following procedures. Navigation Map Topographic Data Navigation Map Black Background TOPO Softkey Not Enabled TOPO Off TOPO Softkey Enabled Figure 5-14 Navigation Map - Topographic Data TOPO On Displaying/removing topographic data on all pages displaying navigation maps: 1) Press the MAP Softkey (the INSET Softkey for the PFD Inset Map). 2) Press the TOPO Softkey. 3) Press the TOPO Softkey again to remove topographic data from the Navigation Map. When topographic data is removed from the page, all navigation data is presented on a black background. Displaying/removing topographic data (TOPO DATA) using the Navigation Map Page Menu: 1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option. 2) Press the ENT Key. The Map Setup Menu is displayed. 3) Select the 'Map' group. 4) Press the ENT Key. 5) Highlight the 'TOPO DATA' field. 6) Select 'On' or 'Off'. 7) Press the FMS Knob to return to the Navigation Map Page. 148 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A