Garmin G1000H Bell 407GX Pilot's Guide - Page 122
Auto-Tuning a NAV Frequency from the MFD, Garmin G1000H, Pilot's Guide for the Bell 407GX
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
AUDIO PANEL AND CNS AUTO-TUNING A NAV FREQUENCY FROM THE MFD NAV frequencies can be selected and loaded from the following MFD pages: • WPT - Airport Information • NRST - Nearest VOR • WPT - VOR Information • NRST - Nearest Frequencies (FSS, WX) • NRST - Nearest Airports • NRST - Nearest Airspaces The MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroute navigation, the NAV frequency is entered automatically into the NAV standby frequency field. During approach activation the NAV frequency is entered automatically into the NAV active frequency field. Frequencies can be automatically loaded into the NAV Frequency Box from pages in the NRST or WPT page group by highlighting the frequency and pressing the ENT Key (Figures 4-23, 4-24, and 4-25). Auto-tuning a NAV frequency from the WPT and NRST Pages: 1) From any page that the NAV frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the appropriate softkey. 2) Turn the FMS Knob to place the cursor on the desired NAV identifier or NAV frequency. 3) On the Nearest VOR and Nearest Airports pages, press the FREQ Softkey to place the cursor on the NAV frequency (Figure 4-25). 4) Press the ENT Key to load the NAV frequency into the standby field of the selected NAV radio. 5) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field. Turn the FMS Knob to Scroll Through a List of Frequencies Press the ENT Key to Load a Highlighted Frequency into the NAV Standby Frequency Box Figure 4-23 NAV Frequency Auto-Tuning from the MFD 110 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A