Garmin G1000H Bell 407GX Pilot's Guide - Page 450

ADDITIONAL FEATURES INCOMING CALLS NOTE: Outside callers should dial 00 + 8816 or 8817 + aircraft phone number when calling the aircraft Iridium Telephone System. When viewing MFD pages other than the AUX-TELEPHONE Page, a pop-up alert similar to Figure 8-79 will be displayed and an aural alert "Incoming Call" will be heard. The pop-up alert may be inhibited at times, such as during takeoff. In addition to the pop-up alert, a ringing phone symbol will be displayed to the right of the MFD page title as shown in Figure 8-79. Also, the voice alert "Incoming Call" will be heard on the selected cockpit audio. Incoming Call Pop-up Incoming Call Symbol on MFD Page Figure 8-79 Incoming Call Answering an incoming call: 1) Press the TEL Key on the appropriate audio panel. 2) Select the ANSWER Softkey on the MFD. Or: While viewing the AUX-TELEPHONE Page: NOTE: The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after selecting the ANSWER Softkey, and stays active until the call is terminated. 1) Press the TEL Key on the appropriate audio panel. 2) Press the MENU Key to display the Page Menu. 3) Turn either FMS Knob to place the cursor on 'Answer Incoming Call'. 4) Press the ENT Key. Selecting the IGNORE Softkey will extinguish the pop-up window and leave the current call unanswered. Selecting the IGNRE ALL Softkey will extinguish the pop-up window for the current and all future incoming calls and leave the current call unanswered. Selecting the TEL Softkey will display the AUX-TELEPHONE Page allowing additional call information to be viewed before answering. 438 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A