Garmin G1000H Bell 407GX Pilot's Guide - Page 52
SYSTEM STATUS Garmin G1000H, Pilot's Guide for the Bell 407GX, Enabling HTAWS voice callouts
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
SYSTEM OVERVIEW Enabling HTAWS voice callouts: 1) Turn the large FMS Knob to select the AUX Page group. 2) Turn the small FMS Knob to select System Setup. 3) If necessary, press the SETUP 2 Softkey to select the System Setup 2 Page. 4) Press the FMS Knob momentarily to activate the flashing cursor. 5) Turn the large FMS Knob to highlight the Max Selected field. 6) Turn the small FMS Knob one click to the left to enable the first callout value. Each subsequent click to the left enables the next callout. SYSTEM STATUS PAGE The System Status Page displays the status and software version numbers for all detected system LRUs. Pertinent information on all system databases is also displayed. Active LRUs are indicated by green check marks and failed LRUs are indicated by red "X"s. Failed LRUs should be noted and a Bell service center or Garmin dealer informed. Display Database Selection Softkey Figure 1-30 Example System Status Page The LRU and ARFRM softkeys on the System Status Page select the applicable list (LRU INFO or AIRFRAME window) through which the FMS Knob can be used to scroll information within the selected window. Pressing the Display Database Selection Softkey (background changes to grey indicting the softkey is selected) places the cursor in the DATABASE window. Use the FMS Knob to scroll through database information for the database information. Each press of the Display Database Selection Softkey will change the softkey label (PFD1 DB, etc) to indicate the display for which database information is displayed. The ANN TEST Softkey, when pressed, causes an annunciation test tone to be played, the RMP and master warning/ caution PBAs to illuminate, and the instrument fan to activate. 40 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A