Garmin G1000H Bell 407GX Pilot's Guide - Page 207
Flight Plan Creation, Active Flight Plan
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
FLIGHT MANAGEMENT The following could cause the airway update to fail: • Airway identifier, entry waypoint or exit waypoint not found in the new database. • Airway entry/exit waypoint is not an acceptable waypoint for the airway - either the waypoint is no longer on the airway, or there is a new directional restriction that prevents it being used. • Loading the new airway sequence would exceed the capacity of the flight plan. FLIGHT PLAN CREATION There are three methods to create or modify a flight plan: • Active Flight Plan Page on the MFD (create/modify the active flight plan) • Active Flight Plan Window on the PFD (create/modify the active flight plan) • Flight Plan Catalog Page on the MFD (create/modify a stored flight plan) Active Flight Plan Leg Turn Anticipation Arc Non-Active, Flight Plan Leg Figure 5-55 Active Flight Plan Page Active FPL Waypoint List - Comment - Procedure Header - Waypoint Identifier - Airway Identifier - Desired Track to Waypoint - Distance to Waypoint - Waypoint Altitude Constraint Vertical Navigation Profile - Active Vertical WPT Alt/ID - Vertical Speed Target - Flight Path Angle - Vertical Speed Target - Time to Top of Descent - Vertical Deviation 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 195