Garmin G1000H Bell 407GX Pilot's Guide - Page 171
Track Vector, Garmin G1000H, Pilot's Guide for the Bell 407GX, Displaying/removing the track vector
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
The following range items are configurable on the airways menu: Airway Type Symbol Low Altitude Airway (LOW ALT AIRWAY) High Altitude Airway (HI ALT AIRWAY) FLIGHT MANAGEMENT Default Maximum Range (nm) Range (nm) 200 500 300 500 Table 5-4 Airway Range Information TRACK VECTOR The Navigation Map can display a track vector that is useful in minimizing track angle error. The track vector is a solid light blue line segment extended to a predicted location. The track vector look-ahead time is selectable (30 sec, 60 sec (default), 2 min, 5 min, 10 min, 20 min) and determines the length of the track vector. The track vector shows up to 90 degrees of a turn for the 30 and 60 second time settings. Track Vector Figure 5-24 Navigation Map -Track Vector Displaying/removing the track vector: 1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option. 2) Press the ENT Key. The Map Setup Menu is displayed. 3) Select the 'Map' group. 4) Press the ENT Key. 5) Highlight the 'TRACK VECTOR' field. 6) Select 'On' or 'Off'. Press the ENT Key to accept the selected option. The flashing cursor highlights the look ahead time field. Use the FMS Knob to select the desired time. Press the ENT Key. 7) Press the FMS Knob to return to the Navigation Map Page. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 159