Garmin G1000H Bell 407GX Pilot's Guide - Page 359
Displaying traffic information PFD Inset Map
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
HAZARD AVOIDANCE Displaying traffic information (PFD Inset Map): 1) Select the INSET Softkey. 2) Select the TRAFFIC Softkey to display traffic data on the inset map (TRFC-1). 3) Select the softkey again to display the traffic-only inset (TRFC-2). 4) Select the softkey again to remove traffic data. Customizing traffic display on the Navigation Map Page: 1) Select the Navigation Map Page. 2) Press the MENU Key. 3) With 'Map Setup' highlighted, press the ENT Key (Figure 6-85). 4) Turn the small FMS Knob to select the 'Traffic' Group and press the ENT Key (Figure 6-86). 5) Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-87). • TRAFFIC - Turns the display of traffic data on or off • TRAFFIC MODE - Selects the traffic mode for display; select from: - All Traffic - Displays all traffic - TA/PA - Displays Traffic Alerts and Proximity Advisories - TA ONLY - Displays Traffic Alerts only • TRAFFIC SMBL - Selects the maximum range at which traffic symbols are shown • TRAFFIC LBL - Selects the maximum range at which traffic labels are shown (with the option to turn off) 6) Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings, etc.). 7) Press the ENT Key to select an option. 8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 347