Garmin G1000H Bell 407GX Pilot's Guide - Page 30

SYSTEM OVERVIEW STBY ON ALT GND VFR CODE IDENT 0 - 7 BKSP IDENT TMR/REF NRST MSG CAS Selects standby mode (transponder does not reply to any interrogations) Selects Mode A (transponder replies to interrogations) Selects Mode C - altitude reporting mode (transponder replies to identification and altitude interrogations) Allows manual selection of ground mode in certain conditions Automatically enters the VFR code (1200 in the U.S.A. only) Displays transponder code selection softkeys 0-7 Use numbers to enter code Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying the transponder return on the ATC screen Removes numbers entered, one at a time Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying the transponder return on the ATC screen Displays Timer/References Window Displays Nearest Airports Window Displays the Message Window MSG CAS ↑ CAS ↓ Figure 1-13 Top Level PFD Softkeys CAS MSG WX LGND METAR MSG Press the BACK Softkey to return to the top-level softkeys. Figure 1-14 INSET Softkeys 18 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A