Garmin G1000H Bell 407GX Pilot's Guide - Page 269
to 2.0 nm., is less than 2.0 nm, the XTK
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
FLIGHT MANAGEMENT d) Verify the displayed leg is the desired leg and press the ENT Key. Note in Figure 5-114, the magenta arrow in the flight plan window and magenta line on the map indicating V4 is now the active flight plan leg. Note the phase of flight remained in Terminal (TERM) mode up to this point because a departure leg was active. Since a leg after the departure is now active, the current CDI flight phase is ENR (Enroute) and CDI scaling has changed to 2.0 nm. Figure 5-114 V4 Now Active Leg 6) The aircraft continues on heading 290º. When crosstrack distance is less than 2.0 nm, the XTK disappears from the HSI and the CDI is positioned on the last dot indicating a 2.0 nm distance from the centerline of the next course. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 257