Garmin G1000H Bell 407GX Pilot's Guide - Page 133
Entering a Transponder Code, Garmin G1000H, Pilot's Guide for the Bell 407GX
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
AUDIO PANEL AND CNS ENTERING A TRANSPONDER CODE Entering a transponder code with softkeys: 1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys. 2) Press the CODE Softkey to display the Transponder Code Selection Softkeys, for digit entry. 3) Press the digit softkeys to enter the code in the code field. When entering the code, the next softkey in sequence must be pressed within 10 seconds, or the entry is cancelled and restored to the previous code. Pressing the BKSP Softkey moves the code selection cursor to the previous digit. Five seconds after the fourth digit has been entered, the transponder code becomes active. Entering a Code Figure 4-36 Entering a Code Entering a transponder code with the PFD FMS Knob: 1) Press the XPDR and the CODE Softkeys as in the previous procedure to enable code entry. 2) Turn the small FMS Knob on the PFD to enter the first two code digits. 3) Turn the large FMS Knob to move the cursor to the next code field. 4) Enter the last two code digits with the small FMS Knob. 5) Press the ENT Key to complete code digit entry. Pressing the CLR Key or small FMS Knob before code entry is complete cancels code entry and restores the previous code. Waiting for 10 seconds after code entry is finished activates the code automatically. Turn the Small FMS Knob to Enter Two Code Digits at a Time Press the ENT Key to Complete Code Entry Turn the Large FMS Knob to Move the Cursor to the Next Code Field Figure 4-37 Entering a Code with the FMS Knob 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 121