Garmin G1000H Bell 407GX Pilot's Guide - Page 493
G1000h System Annunciations
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 493 highlights
APPENDIX A G1000H SYSTEM ANNUNCIATIONS When a new message is issued, the MSG Softkey will flash to alert the flight crew of a new message. It will continue to flash until acknowledged by pressing the softkey. Active messages are displayed in white text. Messages that have become inactive will change to gray text. The MSG Softkey will flash if the state of a displayed message changes or a new message is displayed. The inactive messages can be removed from the Message Window by pressing the flashing MSG Softkey. The G1000H System Messages conveys messages to the flight crew regarding problems with the G1000H system. Typically, a large red "X" appears in a window when a related LRU fails or detects invalid data. When an LRU or an LRU function fails, a large red "X" is typically displayed on windows associated with the failed data. The following section describes various system annunciations. Refer to the RFM for additional information regarding pilot responses to these annunciations. NOTE: Upon power-up of the G1000H system, certain windows remain invalid as G1000H equipment begins to initialize. All windows should be operational within one minute of power-up. Should any window continue to remain flagged, the G1000H system should be serviced by a Garmin-authorized repair facility. System Annunciation Red 'X' Messages Window Message Softkey Annunciation Figure A-1 G1000H System Messages 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 481