Garmin G1000H Bell 407GX Pilot's Guide - Page 505
Gdc 74h Message Advisories, Miscellaneous Message Advisories, Message, Comments, Adc1 Alt Ec, Manifest
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 505 highlights
APPENDIX A GDC 74H MESSAGE ADVISORIES Message ADC1 ALT EC - ADC1 altitude error correction is unavailable. ADC1 AS EC - ADC1 airspeed error correction is unavailable. MANIFEST - GDC1 software mismatch, communication halted. Comments GDC is reporting that the altitude error correction is unavailable. GDC is reporting that the airspeed error correction is unavailable. The GDC 74B has incorrect software installed. The system should be serviced. GTS 800 MESSAGE ADVISORIES Message GTS CONFIG - GTS config error. Config service req'd. MANIFEST - GTS software mismatch, communication halted. Comments The GTS and GDU have incompatible configurations. This alert is also set when the GTS has an invalid mode S addres sconfigured or the mode S address does not match both XPDR mode S addresses. The GTS has incorrect software installed. The G1000H system should be serviced. MISCELLANEOUS MESSAGE ADVISORIES Message FPL WPT LOCK - Flight plan waypoint is locked. FPL WPT MOVE - Flight plan waypoint moved. TIMER EXPIRD - Timer has expired. DB CHANGE - Database changed. Verify user modified procedures. DB CHANGE - Database changed. Verify stored airways. FPL TRUNC - Flight plan has been truncated. LOCKED FPL - Cannot navigate locked flight plan. Comments Upon power-up, the system detects that a stored flight plan waypoint is locked. This occurs when an navigation database update eliminates an obsolete waypoint. The flight plan cannot find the specified waypoint and flags this message. This can also occur with user waypoints in a flight plan that is deleted. Remove the waypoint from the flight plan if it no longer exists in any database, Or update the waypoint name/identifier to reflect the new information. The system has detected that a waypoint coordinate has changed due to a new navigation database update. Verify that stored flight plans contain correct waypoint locations. The system notifies the pilot that the timer has expired. This occurs when a stored flight plan contains procedures that have been manually edited. This alert is issued only after an navigation database update. Verify that the user-modified procedures in stored flight plans are correct and up to date. This occurs when a stored flight plan contains an airway that is no longer consistent with the navigation database. This alert is issued only after an navigation database update. Verify use of airways in stored flight plans and reload airways as needed. This occurs when a newly installed navigation database eliminates an obsolete approach or arrival used by a stored flight plan. The obsolete procedure is removed from the flight plan. Update flight plan with current arrival or approach. This occurs when the pilot attempts to activate a stored flight plan that contains locked waypoint. Remove locked waypoint from flight plan. Update flight plan with current waypoint. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 493