Garmin G1000H Bell 407GX Pilot's Guide - Page 97
Power Situation Indicator
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ENGINE INDICATION & CREW ALERTING SYSTEM 3.2 ENGINE POWER AND SPEED INDICATIONS NOTE: Refer to the Rotorcraft Flight Manual (FRM) for engine operating limitations and corrective actions. The Power Situation Indicator (PSI) and Dual Tachometer are shown as a group in the lower-left of the PFD, and on the EIS - Engine Page of the MFD in a larger format. Maximum Continuous Power Operation Limit Box Indicates Parameter Controlling PSI Indicator Power Available Gauge Torque Readout MGT Readout NG Readout Power Available Indicator Dual Tachometer Gauge NR Indicator NR Readout NP Indicator Figure 3-5 Power Situation Indicator Gauge and Dual Tachometer Gauge POWER SITUATION INDICATOR The PSI provides the pilot with the amount of power available based on engine torque (Q; shown as a percentage), measured gas temperature (MGT, degrees Celsius, °C), and gas producer rotation speeds (NG; shown as a percentage) with respect to operating limitations. A box is shown around the label for the readout currently closest to its maximum continuous power (MCP) limits. This value also controls a pointer along a numeric scale from 0 (no power) to 10 (MCP, shown with a red tick mark). Operating limits are displayed along the PSI gauge and are adjusted dynamically in response to all parameters, to show the range of pointer movement available beyond MCP before any parameter reaches the operating limit. Green arcs indicate continuous operation ranges; yellow arcs indicate transient operating limits. A gray arc becomes red if the Power Available Indicator enters this range; it indicates an exceedance is occurring. In normal operations, the Power Available Indicator pointer will be the same color as the arc it is presently within. If the FADEC is in manual mode and no engine exceedances are occurring, the pointer will be light blue (instead of green). A gray pointer is displayed when an engine failure is detected while in-flight. During engine start, a red triangle appears on the PSI arc when MGT is shown to correspond with MGT starting limits, and remains displayed until the starter has been disengaged for 5 seconds. 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 85