Garmin G1000H Bell 407GX Pilot's Guide - Page 421

ADDITIONAL FEATURES CHARTVIEW CYCLE NUMBER AND EXPIRATION DATE ChartView database is revised every 14 days. Charts are still viewable during a period that extends from the cycle expiration date to the disables date. ChartView is disabled 70 days after the expiration date and is no longer available for viewing. When turning on the system, the Power-up Page displays the current status of the ChartView database. See the table below for the various ChartView Power-up Page displays and the definition of each. ChartView Database Figure 8-45 Power-up Page, ChartView Database Power-up Page Display Definition Blank Line. System is not configured for ChartView. Contact a Garminauthorized service center for configuration. System is configured for ChartView but no chart database is installed. Contact Jeppesen for a ChartView database. Normal operation. ChartView database is valid and within current cycle. ChartView database is within 1 week after expiration date. A new cycle is available for update. ChartView database is beyond 1 week after expiration date, but still within the 70 day viewing period. ChartView database has timed out. Database is beyond 70 days after expiration date. ChartView database is no longer available for viewing. System time is not available. GPS satellite data is unknown or the system has not yet locked onto satellites. Check database cycle number for effectivity. System is verifying chart database when new cycle is installed for the first time. After verifying, chart database is found to be corrupt. ChartView is not available. Table 8-2 ChartView Power-up Page Annunciations and Definitions 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 409