Garmin G1000H Bell 407GX Pilot's Guide - Page 19

SYSTEM OVERVIEW 5 Joystick Turn to change map range Press to activate Map Pointer for map panning 6 CRS/BARO Knob Turn large knob for altimeter barometric pressure setting Turn small knob to adjust course (only when HSI is in VOR or OBS Mode) 7 COM Knob Press to re-center the CDI and return course pointer directly TO bearing of active waypoint/station Turn to tune COM transceiver standby frequencies (large knob for MHz; small for kHz) Press to toggle light blue tuning box between COM1 and COM2 The selected COM (green) is controlled with the COM MIC Key (Audio Panel). 8 COM Frequency Transfer Key (EMERG) Transfers the standby and active COM frequencies Press and hold two seconds to tune the emergency frequency (121.5 MHz) automatically into the active frequency field 9 COM VOL/SQ Knob Turn to control COM audio volume level (shown as a percentage in the COM Frequency Box) 10 Direct-to Key ( 11 FPL Key Press to turn the COM automatic squelch ON/OFF ) Activates the direct-to function and allows the user to enter a destination waypoint and establish a direct course to the selected destination (specified by identifier, chosen from the active route) Displays flight plan information 12 CLR Key (DFLT MAP) 13 MENU Key 14 PROC Key 15 ENT Key Erases information, cancels entries, or removes menus Press and hold to display the MFD Navigation Map Page (MFD only). Displays a context-sensitive list of options for accessing additional features or making setting changes Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and approach procedures (IAPs) for a flight plan or selected airport Validates/confirms menu selection or data entry 16 FMS Knob Press to turn the selection cursor ON/OFF. (Flight Management Data Entry: With cursor ON, turn to enter data in the highlighted field (large knob System Knob) moves cursor location; small knob selects character for highlighted cursor location) Scrolling: When a list of information is too long for the window/box, a scroll bar appears, indicating more items to view. With cursor ON, turn large knob to scroll through the list. 17 Softkey Selection Keys 18 ALT Knob Page Selection: Turn knob on MFD to select the page to view (large knob selects a page group; small knob selects a specific page from the group) Press to select softkey shown above the bezel key on the PFD/MFD display Sets the Selected Altitude, shown above the Altimeter (the large knob selects the thousands, the small knob selects the hundreds) 190-01255-00 Rev. A Garmin G1000H™ Pilot's Guide for the Bell 407GX 7