Garmin G1000H Bell 407GX Pilot's Guide - Page 512
Knob to select the System Status SYNC STATUS field.
View all Garmin G1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 512 highlights
APPENDIX B 5) After the navigation database files are copied to the bottom SD card, the display will appear as shown in Figure B-4. Figure B-4 Standby Navigation Database Update Complete 6) As instructed on the display, press any key to continue. The display will now appear as shown in Figure B-5. Figure B-5 Navigation Database Verification Prompt 7) Press any key to continue. The display will now appear as shown in Figure B-6. Figure B-6 Active Navigation Database Prompt 8) Press the NO Softkey. The display now starts in normal mode. Since the database effective date is not yet valid, it should not be loaded as the active database. The display now starts in normal mode. Do not remove power while the display is starting. 9) Press the ENT Key to acknowledge the startup screen. 10) Turn the large FMS Knob to select the AUX Page group on the MFD. 11) Turn the small FMS Knob to select the System Status Page. 12) The new database is copied to the SD card in the bottom card slot of the PFD. Progress can be monitored in the SYNC STATUS field. When copying is finished, 'Complete' is displayed. 500 Garmin G1000H™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A