HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 1
HP 6125XLG Blade Switch Fundamentals Command Reference Part number: 5998-3730 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 3
17 display telnet client 18 display user-interface 18 display users 20 escape-key 21 flow-control 22 free user-interface 23 history-command max-size 24 idle-timeout 24 lock 25 parity 26 protocol inbound 27 screen-length 27 send 28 set authentication password 29 shell 30 speed 31 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 4
54 role default-role enable 55 role feature-group 56 rule 56 super 59 super authentication-mode 60 super password 61 vlan policy deny 63 vpn-instance policy deny 64 FTP commands 65 FTP server commands 65 display ftp-server 65 display ftp-user 66 free ftp user 66 free ftp user-ip 67 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 5
88 pwd 89 quit 89 reget 90 rename 90 reset 91 restart 91 rhelp 92 rmdir 94 rstatus 94 status 96 system 97 user 98 verbose 98 99 TFTP configuration commands 101 tftp 101 tftp client source 102 tftp ipv6 103 tftp client ipv6 source 104 tftp-server acl 105 tftp-server ipv6 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 6
default-configuration 129 display saved-configuration 131 display startup 132 display this 133 reset saved-configuration 134 restore startup-configuration 135 save 135 startup saved-configuration 137 Software upgrade commands 139 boot-loader file 139 boot-loader update 140 bootrom update - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 7
display ipv6 routing-table 192 display version 193 format 193 ftp 194 install load 194 interface m-eth0 195 ip address 196 ip gateway 196 ipv6 tftp 205 Tcl commands 207 tclsh 207 tclquit 207 Support and other resources 208 Contacting HP 208 Subscription service 208 Related information - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 8
to disable the command keyword alias function. Syntax command-alias enable undo command-alias enable Default The command keyword alias function is disabled. Views System view Predefined user roles network-admin Usage guidelines To make configured aliases take effect, enable the command keyword alias - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 9
to execute the display clock command. To use configured command keyword aliases, make sure the command-alias enable command is configured. Examples # Define show view Predefined user roles network-admin network-operator Parameters command: Specifies the keywords and arguments of a display command. To - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 10
Fundamentals Configuration Guide. Examples # Display the lines that contain "vlan" in the running configuration. display current-configuration | include vlan vlan 1 vlan 999 port access vlan 999 display | by-linenum Use display | by-linenum to number each output line for a display command - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 11
txt file. more vlan.txt VLAN ID: 1 VLAN type: Static Route interface: Not configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/5 display >> Use display >> to append the output from a display command to the end of a file. Syntax display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 12
.2.1 Subnet mask: 255.255.255.0 Description: For LAN Access Name: VLAN 0999 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/6 display command-alias Use display command-alias to display the status of the command keyword alias function and the configured command keyword alias. Syntax display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 13
. You can view them and execute them again. By default, the system can save up to 10 commands in the buffer. You can use the history-command max-size command to change the buffer size. When the number of commands reaches this limit, the earliest commands will be deleted to make room for the newly - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 14
can save up to 1024 commands in the command history buffer. When the number of commands reaches this limit, the earliest commands will be deleted to make room for the newly executed commands. The command history buffer for all CLI sessions is not cleared when a user logs out. Examples # Display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 15
Predefined user roles network-admin network-operator Examples # Display hotkey information. display hotkey Hotkeys -Defined command hotkeysCTRL_G display current-configuration CTRL_L display ip routing-table CTRL_O undo debugging all -Undefined command hotkeysCTRL_T NULL CTRL_U NULL - - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 16
. Use undo hotkey to restore the default. Syntax hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } command undo hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } Default • ctrl_g: display current-configuration (display the running configuration). • ctrl_l: display ip routing-table (display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 17
roles network-admin network-operator Usage guidelines Pressing Ctrl+Z has the same effect as the return command. Examples # Return to user view from Ten-GigabitEthernet1/1/5 interface view. [Sysname-Ten-GigabitEthernet1/1/5] return screen-length disable Use screen-length disable to disable - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 18
out, the default is restored. Examples # Disable pausing between screens of output for the current session. screen-length disable Related commands screen-length system-view Use system-view to enter system view from user view. Syntax system-view Views User view Predefined user roles network - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 19
complies with NIST FIPS 140-2 requirements. Support for features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about FIPS mode, see Security Configuration Guide. Unless otherwise noted, devices in the configuration examples are operating in non-FIPS mode - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 20
interface-Authentication is disabled if the device started up with the default configuration file, and password authentication is enabled if the device started up with empty configuration. • VTY user interface-Password authentication is enabled. In FIPS mode, scheme authentication is enabled. Views - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 21
Usage guidelines For more information about empty configuration and the default configuration file, see Fundamentals Configuration Guide Parameters none: Performs no authentication. This keyword is not supported in FIPS mode. password: Performs local password authentication. This keyword is not - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 22
undo auto-execute command to remove the configuration. Syntax auto-execute command command undo auto-execute command Default Command auto-execution is disabled. Views VTY user interface view Predefined user roles network-admin Parameters command: Specifies the command to be automatically - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 23
[Sysname] user-interface vty 0 [Sysname-ui-vty0] command accounting Related commands • command authorization • accounting command (Security Command Reference) command authorization Use command authorization to enable command authorization. Use undo command authorization to restore the default. 16 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 24
[Sysname] user-interface vty 0 [Sysname-ui-vty0] command authorization Related commands • command accounting • authorization command (Security Command Reference) databits Use databits to specify the number of data bits for each character. Use undo databits to restore the default. Syntax databits - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 25
Views Any view Predefined user roles network-admin network-operator Examples # Display the Telnet client configuration of the device when . Related commands telnet client source display user-interface Use display user-interface to display user interface information. Syntax display user-interface [ - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 26
mode. Int : Physical port of the user interface. A : Authentication use AAA. N : No authentication is required. P : Password authentication. Table 1 Command output Field Description Modem Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen (-) is - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 27
3 user interfaces used. (U) 33 user interfaces not used. (X) Table 2 Command output Fields number:status Description The number indicates the absolute number of the first user interface of the user interface type, starting from 0. The status indicates whether the user interfaces of the user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 28
Table 3 Command output Field Idx UI Delay Type + Location F Description Absolute number of the user interface. Type and relative number of the user interface. Time elapsed after the user's last input, in the format hh:mm:ss. User type, such as Telnet or SSH. Indicates the user interface you are - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 29
Default The flow control mode is none. Views AUX user interface view, console user interface view Predefined user roles network-admin Parameters hardware: Performs hardware flow control. none: Disables flow control. software: Performs software flow control. Usage guidelines The switch supports - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 30
Examples # Configure software flow control in the inbound and outbound directions for user interface AUX 0. system-view [Sysname] user-interface aux 0 [Sysname-ui-aux0] flow-control none free user-interface Use free user-interface to release a user interface. Syntax free user-interface - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 31
max-size size-value undo history-command max-size Default The buffer of a user interface saves up to 10 history commands. Views User interface view Predefined user roles network-admin Parameters size-value: Specifies the maximum number of history commands the buffer can store, in the range of - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 32
the user interface. Syntax lock Default By default, the system does not lock any user interface. Views User view Predefined user roles network-admin Usage guidelines This command is not supported in FIPS mode. After executing the lock command, you must enter the password for unlocking the user line - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 33
Again: locked ! // The user interface is locked. To unlock it, press Enter and enter the password: Password: parity Use parity to specify a parity check mode. Use undo parity to restore the default. Syntax parity { even | mark | none | odd | space } undo parity Default The setting is none - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 34
mode. ssh: Supports SSH only. telnet: Supports Telnet only. This keyword is not supported in FIPS mode. Usage guidelines This configuration is effective only for a user who logs in to the user interface after the configuration is completed. Before configuring a user interface to support SSH, set - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 35
press PgUp. The screen pause function is enabled by default. To disable this function, execute the screen-length 0 command or the screen-length disable command. The screen-length disable command is available in user view. Examples # Set the maximum number of lines to be displayed on a screen to 30 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 36
of the user's configuration terminal, as password for password authentication. Use undo set authentication password to remove the password. Syntax set authentication password { hash | simple } password undo set authentication password Default No password is set for password authentication. Views User - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 37
110 characters. Usage guidelines This command is not supported in FIPS mode. Whether you specify the hash or simple keyword for the command, the password is hashed before being saved to the configuration file. Examples # Set the password for password authentication on user interface AUX 0 to hello - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 38
the device must be configured with the same transmission rate to communicate. Examples # Set the transmission rate to 19200 bps for user interface AUX 0. system-view [Sysname] user-interface aux 0 [Sysname-ui-aux0] speed 19200 stopbits Use stopbits to specify the number of stop bits for - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 39
Usage guidelines This command is only applicable to asynchronous serial interfaces, including console ports. The configuration terminal and the device must be configured to use the same number of stop bits to communicate. Examples # Set the number of stop bits to 1 for user interface AUX 0. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 40
serves as a Telnet client. Use undo telnet client source to remove the configuration. Syntax telnet client source { interface interface-type interface-number | ip ip-address } undo telnet client source Default Views No source IPv4 address or source interface is specified for outgoing Telnet - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 41
ip 1.1.1.1 Related commands display telnet client configuration telnet ipv6 Use telnet ipv6 to Telnet to a host in an IPv6 network. Syntax telnet ipv6 remote-host [ -i interface-type interface-number ] [ port-number ] [ vpn-instance vpn-instance-name ] Views User view Predefined user roles network - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 42
Views System view Predefined user roles network-admin Parameters acl-number: Specifies an ACL by its number: • Basic ACL-2000 to 2999. • Advanced ACL-3000 to 3999. • Ethernet frame header ACL-4000 to 4999. Usage guidelines This command is not supported in FIPS mode. Only one ACL can be used to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 43
user roles network-admin Usage guidelines This command is not supported in FIPS mode. Administrators can Telnet to the device only when the Telnet server function is enabled. For more information about empty configuration and the default configuration file, Fundamentals Configuration Guide - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 44
guidelines The device supports two terminal display types: ANSI and VT100. HP recommends you set the display type to VT100 on both the device and the configuration terminal. If either side uses the ANSI type, a display problem such as cursor positioning error might occur when a command line has more - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 45
a VTY user interface. This number cannot be smaller than first-number2. Usage guidelines If you use this command to enter a single user interface view, your configuration applies only to the user interface. If you use this command to enter multiple user interface views, your configuration applies to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 46
the command restores the default user role. Usage guidelines This command is not supported in FIPS mode. You can assign up to 64 user roles to a user interface. A user logged in to the user interface gets all the user roles. For more information about user roles, see Fundamentals Configuration Guide - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 47
with NIST FIPS 140-2 requirements. Support for features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about FIPS mode, see Security Configuration Guide. description Use description to configure a description for a user role. Use undo description to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 48
range of 0 to 15), and security-audit. User role description you have configured for easy identification. VLAN policy of the user role: • deny-Denies access to any VLAN except permitted VLANs. • permit (default)-Default VLAN policy, which enables the user role to access any VLAN. VLANs accessible to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 49
except permitted VPNs. • permit (default)-Default VPN instance policy, which enables the user role to access any VPN instance. VPNs accessible to the user role. User role rule number. A user role rule specifies the permission to access a command or a set of commands. Predefined user role rules are - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 50
> display role feature Feature: device (Device configuration related commands) Feature: interface (Interface related commands) Feature: syslog (Syslog related commands) Feature: process (Process related commands) ... # Display the commands of each feature. display role feature - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 51
-view ; archive configuration * (W) system-view ; configuration encrypt * (W) commands) system-view ; domain * (W) system-view ; header * (W) system-view ; aaa * (W) display domain * (R) system-view ; user-group * (W) system-view ; local-user * (W) display local-user * (R) display user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 52
display password-control in user view. All the commands that start with reset password-control in user view. All the commands that start with password-control in system view. Command type is Write. A write command configures the system. Command type is Read. A read command displays configuration or - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 53
Predefined user roles network-admin network-operator Parameters name feature-group-name: Specifies a feature group. The feature-group-name argument represents the feature group name, a case-sensitive string of 1 to 31 characters. If no feature group is specified, the command displays information - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 54
group verbose Feature group: L2 Feature: igmp-snooping (IGMP-Snooping related commands) system-view ; igmp-snooping (W) system-view ; multicast-vlan * interface * ; igmp-snooping * (W) system-view ; interface * ; port multicast-vlan * (W) display igmp-snooping * (R) display pim-snooping * (R) - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 55
Listener Discovery related commands) (Multicast Source Discovery Protocol related commands) feature Use feature to add a feature to a feature group. Use undo feature to remove a feature from a feature group. Syntax feature feature-name undo feature feature-name Default A user-defined feature group - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 56
make sure the interface is permitted by the interface policy of any user role that you are logged in with: • Create, remove, or configure an interface. • Enter its interface view. • Specify the interface in a feature command. The create and remove operations are available only to logical interfaces - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 57
must be the same type as the start interface and must have a higher interface number than the start interface. Usage guidelines To permit a user role to access an interface after you configure the interface policy deny command, you must add the interface to the permitted interface list of the policy - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 58
commands • display role • interface policy deny • role permit vlan Use permit vlan to configure a list of VLANs accessible to a user role. Use undo permit vlan to remove the permission for a user role to access specific VLANs. Syntax permit vlan vlan-id-list undo permit vlan [ vlan-id-list ] Default - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 59
. Usage guidelines To permit a user role to access a VLAN after you configure the vlan policy deny command, you must add the VLAN port Ten-GigabitEthernet 1/1/5 to VLAN 100 as an access port. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] port - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 60
vpn-instance-name& undo permit vpn-instance [ vpn-instance-name& ] Default No permitted VPNs are configured in user role VPN instance policy. Views User role VPN instance policy view Predefined user roles network-admin Parameters vpn-instance-name&: Specifies a space-separated list - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 61
commands • display role • role • vpn-instance policy deny role Use role to create a user role and enter user role view. If the user role has been created, you directly enter the user role view. Use undo role to delete a user role. Syntax role name role-name undo role name role-name Default The - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 62
authorization. If AAA users have been assigned user roles, they log in with the user roles. The default user role function does not take effect on these users. Examples # Enable the default user role feature. system-view [Sysname] role default-role enable Related commands role 55 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 63
feature-group-name Default Two user role feature groups, L2 and L3, are created. Views System view Predefined user roles network-admin or change a user role rule for controlling command access. Use undo rule to delete a user role rule. Syntax rule number { deny | permit } { command command-string | { - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 64
expression. • Feature rule-Controls access to the commands of a feature by command type. • Feature group rule-Controls access to the commands of a group of features by command type. You can configure up to 256 rules for a user role, but the total number of user role rules in the system cannot exceed - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 65
Table 6 Command string configuration rules Rule Guidelines Semicolon (;) is the delimiter. Use a semicolon to separate the command of each view that you must enter before you access a command or a set of commands, except for the commands (for example, display and dir) available in user view or - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 66
number command in interface view, because this command is assigned to system view rather than interface view. To disable access to this command, use "rule 1 deny command command but not a display debugging > log command. Examples # Permit the user role role1 to execute the display acl command. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 67
super (Security Command Reference) • super authentication-mode • super password super authentication-mode Use super authentication-mode to set an authentication mode when you obtain the user role that you are not logged in with. Use undo super authentication-mode to restore the default. Syntax super - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 68
> system-view [Sysname] super authentication-mode scheme local Related commands • authentication super (Security Command Reference) • super password super password Use super password to set a password for a user role. Use undo super password to restore the default. Syntax In non-FIPS mode: super - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 69
you do not specify any parameters, you specify a plaintext password in the interactive mode. The FIPS mode supports only the interactive mode for setting a password. Set a password if you configure local password authentication for temporary user role authorization. It is a good practice to specify - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 70
that you are logged in with: • Create, remove, or configure a VLAN. • Enter its view. • Specify the VLAN in a feature command. Any change to a user role VLAN policy takes effect only on users that log in with the user role after the change. Examples # Deny the access of role1 to any VLAN. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 71
the VPN instance policy of any user role that you are logged in with: • Create, remove, or configure an MPLS L3VPN. • Enter its view. • Specify it in a feature command, Any change to a user role VPN instance policy takes effect only on users that log in with the user role after the change. Examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 72
Guide. FTP is not supported in FIPS mode. FTP server commands display ftp-server Use display ftp-server to display FTP server configuration and status information. Syntax display ftp-server Views Any view Predefined user roles network-admin network-operator Examples # Display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 73
/123456789/123456789/1234567 89/123456789 Table 8 Command output Field UserName HostIP Port HomeDir Description Name of the user. IP address of the user. Port number of the user. Authorized directory for the user. free ftp user Use free ftp user to manually release the FTP connection that was - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 74
to view the source IP address of the FTP connection. port port: Specifies the source port of an FTP connection to be released. You can use the display ftp-user command to view the source port of the FTP connection. Examples # Manually release the FTP connection that was established from IP address - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 75
user roles network-admin Parameters acl-number: Specifies an IPv4 ACL number in the range of 2000 to 3999. ipv6 acl-number6: Specifies an IPv6 ACL number in the range of 2000 to 3999. Usage guidelines You can use this command to permit only FTP requests from specific FTP clients. This configuration - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 76
server. Use undo ftp server enable to disable the FTP server. Syntax ftp server enable undo ftp server enable Default The FTP server is disabled. Views System view Predefined user roles network-admin Examples # Enable the FTP server. system-view [Sysname] ftp server enable ftp timeout Use - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 77
configured authorization settings for users on the FTP server. Authorized operations include view the files under the working directory, read/download specified files, create directories, upload files, and rename/remove files. The FTP client commands in this section are supported user to port 50190 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 78
ftp> ascii 200 TYPE is now ASCII Related commands binary binary Use binary to set the file transfer mode to binary, which is also called the "flow mode." Syntax binary Default The file transfer mode is ASCII. Views FTP client view Predefined user roles network-admin Usage guidelines You can perform - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 79
network-admin Examples # Terminate the connection to the FTP server and return to user view. ftp> bye 221-Goodbye. You uploaded 2 and downloaded 2 kbytes. 221 Logout. Related commands quit cd Use cd to change the current working directory to another directory on the FTP server. Syntax - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 80
see Fundamentals Configuration Guide. ..: Returns to the upper directory. Executing the cd .. command is the same as executing the cdup command. If command does not change the working directory if the current directory is the FTP root directory. Syntax cdup Views FTP client view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 81
exiting FTP client view. Syntax close Views FTP client view Predefined user roles network-admin Usage guidelines You can perform this operation only and downloaded 0 kbytes. 221 Logout. ftp> Related commands disconnect debug Use debug to enable or disable FTP client debugging. Syntax debug Default - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 82
EPRT |2|8::124|50198| 200 PORT command successful ---> RETR a.txt Description FTP command. • 2-IPv6 (1 for IPv4). • 8::124-IPv6 address of the FTP server. • 50198-Port number of the FTP server. Received FTP reply code. 200 represents the reply code, defined in RFC 959. Downloads file a.txt. delete - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 83
[ localfile ] ] Views FTP client view Predefined user roles network-admin Parameters remotefile: Specifies the name of command. Examples # Display detailed information about the files and subdirectories under the current directory on the FTP server. ftp> dir 150 Connecting to port - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 84
-file: a.txt? [Y/N]y 150 Connecting to port 50203 226-Glob: a.txt # Display the content of file s.txt. ftp> bye 221-Goodbye. You uploaded 0 and downloaded 2 kbytes. 221 Logout. more s.txt -rwxr-xr-x 1 0 0 1481 Jul 7 12:34 a.txt Related commands ls disconnect Use disconnect to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 85
-ip-address } ] ] Views User view Parameters ftp-server: Specifies the IPv4 address or host name of an FTP server. A host name can be a case-insensitive string of 1 to 253 characters. service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 86
service (by Texas Imperial Software) ready for new user User (192.168.0.211:(none)): abc 331 Give me your password, please Password: default. Syntax ftp client source { interface interface-type interface-number | ip source-ip-address } undo ftp client source Default No source IP address is configured - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 87
ip 192.168.20.222 Related commands ftp ftp client ipv6 source Use Default Views No source address is configured. The device automatically selects a source IPv6 address as defined in RFC 3484. System view Predefined user roles network-admin Parameters interface interface-type interface-number - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 88
to 253 characters. service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21. source ipv6 source-ipv6-address: Specifies the source IPv6 address for sent FTP packets. This address must be an IPv6 address that has been configured on the device - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 89
Password: 230 User logged in Remote system type is HP get Use get to download a file from the FTP server and save the file. Syntax get remotefile [ localfile ] Views FTP client view Predefined user roles network-admin Parameters remotefile: Specifies the name of the file to be downloaded. localfile: - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 90
to display all commands supported by an FTP client. Use help command-name to display the help information of a specific command. Syntax help [ command-name ] Views FTP client view Predefined user roles network-admin Parameters command-name: Specifies a command supported by the FTP client - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 91
Predefined user roles network [ remotefile [ localfile ] ] Views FTP client view Predefined user roles network-admin Parameters remotefile: Specifies the file name or FTP client view, executing the ls command is the same as executing the dir command. Examples # Display detailed information about - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 92
-file: a.txt? [Y/N]y 150 Connecting to port 50203 226-Glob: a.txt # Display the content of file s.txt. ftp> bye 221-Goodbye. You uploaded 0 and downloaded 2 kbytes. 221 Logout. more s.txt -rwxr-xr-x 1 0 0 1481 Jul 7 12:34 a.txt Related commands dir mkdir Use mkdir to create - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 93
server. If the local file does not exist, this command downloads the file from the FTP server and saves it locally. If the remote file on the FTP server is not newer than the local file, this command does not update the local file. Examples # Update the local file with the file a.txt on the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 94
of the FTP server. service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21. Usage guidelines After you issue this command, you are prompted to enter the username and password. You must provide correct username and password before you can log - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 95
server. Syntax put localfile [ remotefile ] Views FTP client view Predefined user roles network-admin Parameters localfile: Specifies the name of the local file the ftp command and save the file as b.txt on the FTP server. ftp> put a.txt b.txt local: a.txt remote: b.txt 150 Connecting to port 47461 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 96
put slot2#flash:/test/a.txt b.txt local: slot2#flash:/test/a.txt remote: b.txt 150 Connecting to port 47461 226 File successfully transferred 1569 bytes sent in 0.000671 seconds (2.23 Mbyte/s) Related commands get pwd Use pwd to display the currently accessed directory on the FTP server. Syntax pwd - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 97
file. Usage guidelines You can perform this operation only after you log in to the FTP server. If a file download is not completed due to network problems or insufficient storage space, you can use the reget command to get the missing part of the file from the FTP server after you solve the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 98
or moved reset Use reset to clear the reply information received from the FTP server in the buffer. Syntax reset Views FTP client view Predefined user roles network-admin Examples # Clear the reply information received from the FTP server. ftp> reset restart Use restart to specify the marker to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 99
to display the help information of an FTP-related command supported by the FTP server. Syntax rhelp [ protocol-command ] Views FTP client view Predefined user roles network-admin Parameters protocol-command: Specifies an FTP-related command. Usage guidelines You can perform this operation only after - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 100
214 UNIX Type: L8 Table 10 Command output Field USER PASS NOOP SYST TYPE CWD XCWD PWD CDUP XCUP XPWD LIST NLST MLSD PORT EPRT PASV EPSV REST RETR STOR APPE DELE MKD XMKD Description Username, corresponding to the xx command in FTP client view. Password. Null operation. System parameters. Request - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 101
the FTP server. Syntax rmdir directory Views FTP client view Predefined user roles network-admin Parameters directory: Specifies the name of a directory on more information about how to delete files, see the delete command. Executing the rmdir command also deletes the files in the recycle bin of the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 102
user roles network-admin Parameters remotefile: Specifies a directory or file on the FTP server. Usage guidelines You can perform this operation only after you log in to the FTP server. Support for this command and output of this command is plain text. FTP connection number is 1. FTP version is - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 103
Description Beginning of the display of the file, where 213 specifies the FTP command. The first bit specifies the file type: • --Common. • B- users. • --No permission. • r-Read permission. • w-Write permission. • x-Execution permission. Number of connections. Name of the file owner. Group number - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 104
Use of PORT cmds: on Table 13 Command output Field support obtaining multiple files once and deletes "\r" when downloading text files. Does not use the input-output transmission table. The file name does not use the input-to-output mapping template. Does not end with a pound sign (#) and uses "PORT - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 105
password of the target user account must have been configured. Otherwise, the user User logged in. • Method 2 ftp> user ftp 331 Password required for ftp. Password: 230 User logged in. verbose Use verbose to enable or disable the device to display FTP operation information. Syntax verbose Default - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 106
to port 47455 226 File successfully transferred 1569 bytes received in 0.0117 seconds (130.8 kbyte/s) ? Use ? to display all commands supported by an FTP client. Use ? command-name to display the help information for a specific command. Syntax ? [ command-name ] Views FTP client view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 107
debug dir disconnect get help lcd mkdir newer open passive put pwd reget rstatus rhelp rename reset restart # Display the help information for the dir command. ftp> ? dir dir list contents of remote directory Related commands help status system user verbose ? 100 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 108
Support for features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about FIPS mode, see Security Configuration Guide. TFTP is not supported in FIPS mode. tftp Use tftp to download -number | ip source-ip-address } ] Views User view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 109
size, in bytes. Average download speed, in bps. Average upload speed, in bps. Related commands tftp client source tftp client default. Syntax tftp client source { interface interface-type interface-number | ip source-ip-address } undo tftp client source Default No source IP address is configured - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 110
interface-number: Specifies an output interface by its type and number. This parameter can be used only when the TFTP server address is a link local address and the specified output interface has a link local address. For link local address configuration, see Layer 3-IP Services Configuration Guide - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 111
. Use undo tftp client ipv6 source to restore the default. Syntax tftp client ipv6 source { interface interface-type interface-number | ipv6 source-ipv6-address } undo tftp client ipv6 source Default No source address is configured. The device automatically selects a source IPv6 address as defined - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 112
undo tftp-server acl to restore the default. Syntax tftp-server acl acl-number undo tftp-server acl Default No ACL is used to control the device's access to TFTP servers. Views System view Predefined user roles network-admin Parameters acl-number: Specifies the number of a basic ACL, in the range of - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 113
. Syntax tftp-server ipv6 acl acl-number undo tftp-server ipv6 acl Default No ACL is used to control the device's access to TFTP servers. Views System view Predefined user roles network-admin Parameters acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999. Usages guidelines - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 114
User view Predefined user roles network-admin Parameters directory: Specifies the name of the destination directory, case insensitive, in the format [drive:/]path. For more information about how to enter the drive and path arguments, see Fundamentals Configuration Guide the cd .. command. No online - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 115
case sensitive depends on the server. Usage guidelines You can use the copy command to perform the following operations: • Copy a local file and save it in Fundamentals Configuration Guide. On an FTP server Enter the URL in the format ftp://FTP username[:password]@server address[:port number]/ - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 116
password are user and private. copy test.cfg ftp://user:[email protected]/testbackup.cfg Copy flash:/test.cfg to ftp://user . # Copy the master's configuration file test.cfg to the command with caution. You cannot restore a file deleted with this command. The delete file-url command - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 117
1.cfg Delete slot2#flash:/1.cfg?[Y/N]:y Deleting file slot2#flash:/1.cfg...Done. Related commands • undelete • reset recycle-bin dir Use dir to display files or /all ] [ file-url | /all-filesystems ] Views User view Predefined user roles network-admin Parameters /all: Displays all files and folders - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 118
command. Examples # Immediately after login, display information about all files and folders in the storage medium of the master. dir /all Directory of flash: ... # Display files and folders in the root directory of all storage media on the IRF } undo file prompt Default The alert mode is - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 119
medium for damage and repair any damage. Syntax fixdisk medium-name Views User view Predefined user roles network-admin Parameters medium-name: Specifies the name of a storage medium name, case insensitive. Usage guidelines Use this command to fix a storage medium when space on the medium cannot be - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 120
Predefined user roles network-admin Parameters filename: Specifies the name of the file to be decompressed. This argument must have .gz as the extension. Usage guidelines This command deletes the specified file after decompressing it. Examples # Decompress the file system.bin.gz. 1. Before - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 121
Predefined user roles network-admin Parameters filename: Specifies the name of the file to be compressed. The compressed file will be saved to file filename.gz. Usage guidelines This command deletes the specified file after compressing it. Examples # Compress the file system.bin. 1. Before - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 122
must be unique in the specified directory. To use this command to create a folder, the specified directory must exist. For a text file. Syntax more file-url Views User view Predefined user roles network-admin Parameters file-url: Specifies a sysname HP # ftp server enable # telnet server enable 115 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 123
ID 2. more slot2#flash:/testcfg.cfg # version 7.1.035, Release 2306 # sysname HP # ftp server enable # telnet server enable # irf mac-address persistent timer irf auto-update enable irf link-delay 0 irf member 2 priority 1 # isis 1 # mac-address mac-roaming enable # lldp global enable - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 124
Moving file flash:/b.cfg to flash:/test2/b.cfg... Done. pwd Use pwd to display the current working directory. Syntax pwd Views User view Predefined user roles network-admin Examples # Display the current working directory. pwd flash: rename Use rename to rename a file or folder. Syntax - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 125
the name of an existing file or folder in the current working directory, this command is not executed. Examples # Rename the copy.cfg file as test.cfg. the recycle bin. Syntax reset recycle-bin [ /force ] Views User view Parameters /force: Deletes all files in the recycle bin without prompting for - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 126
Clear flash:/b.cfg?[Y/N]:y Clearing file flash:/b.cfg... Done. Related commands delete rmdir Use rmdir to remove a folder. Syntax rmdir directory Views User view Predefined user roles network-admin Parameters directory: Specifies a folder name, case insensitive. Usage guidelines To remove a - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 127
file. For example, you can use this command to calculate the digest of a software image file and compare it with that provided on the HP website to verify whether the file has been recycle bin. Syntax undelete file-url Views User view Predefined user roles network-admin Parameters file-url: Specifies - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 128
as checkpoint references. For more information about the archiving mechanism, see the section about configuration rollback in Fundamentals Configuration Guide. To ensure system performance: • If the device configuration does not change frequently, manually archive the running configuration as needed - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 129
configuration as checkpoint references. Automatic configuration archiving enables the system to automatically save the running configuration to the archive directory. For more information about the archiving mechanism, see the section about configuration rollback in Fundamentals Configuration Guide - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 130
serial number for new configuration archives starts at 1. The undo archive configuration location command not only removes the configuration archive directory and file name prefix settings but also disables the configuration archive function (both manual and automatic methods), restores the default - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 131
Related commands • archive configuration • archive configuration location • archive configuration max • display archive configuration archive configuration max Use archive configuration max to set the maximum number of configuration archives. Use undo archive configuration max to restore the default - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 132
.cfg extension. If you do not specify a target file name, the source file name is used. Usage guidelines This command is not supported in FIPS mode. Examples # Back up the main next-startup configuration file to the TFTP server at 2.2.2.2, and set the target file name to 192-168-1-26.cfg. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 133
undo configuration encrypt Default Views Configuration encryption is disabled. The running configuration is saved to a configuration file without encryption. System view Predefined user roles network-admin Parameters private-key: Encrypts configuration with a private key. Only the encrypting - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 134
archive interval, maximum number of archives, and saved archives. Syntax display archive configuration Views Any view Predefined user roles network-admin network-operator Examples # Display configuration archive information. display archive configuration Location: flash:/archive - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 135
the interface type and the interface-number argument represents the interface number. Usage guidelines Use this command to verify the running configuration you have made. Typically, this command does not display parameters that are set to their default settings. If the system has automatically - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 136
Examples # Display local user configuration. display current-configuration configuration local-user # local-user 123 class manage password hash $h$6$S7Z7s7yl4Rn6v68k$0Gti4V6Mk7cH2MpHJhHmfhiEAZWU9DmZKhxftcCNRUp PA2rtuDP+x/rsylegDS2xzI8blHidk74Q/FwABkgFEQ== service-type ftp authorization- - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 137
telnet server enable # local-user admin authorization-attribute user-role level-3 password simple admin # undo ip redirects enable undo ip ttl-expires # radius scheme system user-name-format without-domain # domain system undo access-limit enable state active # domain default enable system # # - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 138
exist, this command displays nothing. Examples # Display the main next-startup configuration file. display saved-configuration # version 7.1.035, Release 2306 # sysname HP # ftp server enable # telnet server enable # irf mac-address persistent timer irf auto-update enable irf link-delay - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 139
mode advance ---- More ---- Related commands • reset saved-configuration • save display startup Use display startup to display the current startup configuration file and the next-startup configuration files. Syntax display startup Views Any view Predefined user roles network-admin network-operator - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 140
display this Views Any view Predefined user roles network-admin network-operator Usage guidelines Use this command to verify the configuration you have made in a certain view. Typically, this command does not display parameters that are set to their default settings. For some parameters that can - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 141
the main next-startup configuration file. Usage guidelines Delete a next-startup configuration file if it does not match the software version or is corrupted. Use this command with caution. This command permanently deletes the next-startup configuration files from all IRF member devices. You can - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 142
: Specifies the file name of the configuration file to be downloaded. Usage guidelines This command is not supported in FIPS mode. Before restoring the configuration file for the next startup, make sure the server is reachable, the server is enabled with TFTP service, and you have read and write - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 143
a next-startup configuration file. Syntax save file-url save [ safely ] [ backup | main ] [ force ] Views Any view Predefined user roles network-admin save command saves configuration to the main next-startup configuration file. Examples # Save the running configuration to the configuration file - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 144
for all IRF member devices. Use undo startup saved-configuration to configure all IRF member devices to start up with the factory defaults at the next startup. Syntax startup saved-configuration cfgfile [ backup | main ] undo startup saved-configuration Views User view Predefined user roles network - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 145
use the undo startup saved-configuration command with caution. This command can cause an IRF split after the IRF fabric or an IRF member reboots. If neither backup nor main is specified, the startup saved-configuration command specifies the main next-startup configuration file. Even though the main - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 146
commands boot-loader file Use boot-loader file to specify startup software image files. Syntax boot-loader file boot boot-package system system-package [ feature feature-package& ] slot slot-number { backup | main } boot-loader file ipe-filename slot slot-number { backup | main } Views User - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 147
backup startup software images at the next reboot on slot 1. Related commands display boot-loader boot-loader update Use boot-loader update to synchronize startup images from the master to a subordinate device. Syntax boot-loader update slot slot-number Views User view Predefined user roles network - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 148
Successfully updated the startup software images of slot 2. Related commands • display boot-loader bootrom update Use bootrom update to load the BootWare image in the flash to the Normal area of BootWare. Syntax bootrom update file file-url slot slot-number-list Views User view Predefined user roles - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 149
boot-loader [ slot slot-number ] Views Any view Predefined user roles network-admin network-operator Parameters slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this command displays the software images on each IRF member device. Examples # Display - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 150
Related commands boot-loader file 143 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 151
Device management commands clock datetime Use clock datetime to set the UTC time. Syntax clock datetime time date Default The default UTC time is 00:00:00 on 01/01/2011. Views User view Predefined user roles network-admin Parameters time: Specifies a time in the format hh:mm:ss. The hh value is in - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 152
time. Use undo clock summer-time to cancel the configuration. Syntax clock summer-time name start-time start-date end-time end-date add-time undo clock summer-time Default Daylight saving time is disabled. Views System view Pre-defined user roles network-admin Parameters name: Specifies a name for - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 153
time and local time zone. You can use the display clock command to view the system time. A correct system time setting is default. Syntax clock timezone zone-name { add | minus } zone-offset undo clock timezone Default The local time zone is the UTC time zone. Views System view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 154
summer-time • display clock command Use command to assign a command to a job. Use undo command to revoke a command. Syntax command id command undo command id Default No command is assigned to a job. Views Job view Predefined user roles network-admin Parameters id: Specifies a command ID in the range - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 155
the validity of the command argument. You must make sure the command is supported by the device, is input in the correct format, and uses valid values. Otherwise, the command cannot be executed automatically. Examples # Assign commands to job backupconfig to back up configuration file startup.cfg to - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 156
clock Use display clock to display the system time, date, local time zone, and daylight saving time. Syntax display clock Views Any view Predefined user roles network-admin network-operator Examples # Display the system time and date when the local time zone is not specified. display clock - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 157
statistics. Syntax display cpu-usage [ slot slot-number [ cpu cpu-number ] ] Views Any view Predefined user roles network-admin network-operator Parameters slot slot-number: Specifies an IRF member device. If no IRF member device is specified, this command displays the CPU usage statistics for all - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 158
] [ slot slot-number [ cpu cpu-number ] ] Views Any view Predefined user roles network-admin network-operator command. For more information, see Network Management and Monitoring Configuration Guide. slot slot-number: Specifies an IRF member device. If no IRF member device is specified, this command - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 159
• The horizontal axis represents the time. • Consecutive pound signs (#) indicate the CPU usage at a specific time. The value on the vertical axis for the topmost pound sign at a specific time represents the CPU usage at that time. Examples # Display the historical CPU usage statistics for the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 160
. Syntax display device [ slot slot-number [subslot subslot-number] | verbose ] Views Any view Predefined user roles network-admin network-operator Parameters slot slot-number: Specifies an IRF member device. If no IRF member device is specified, this command displays information about all member - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 161
AddrLM Type State Description Hardware information about IRF member device 1. Subslot number. For the internal Ethernet port, the subslot number is 0. For the external Ethernet port, the subslot number is 1. Maximum number of ports that the device supports. PCB version of the device. FPGA version - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 162
DEVICE_NAME : 6125XLG DEVICE_SERIAL_NUMBER : 6C02132021 MANUFACTURING_DATE : 2013-02-02 VENDOR_NAME : HP Table 20 Command output Field slot 1 DEVICE_NAME DEVICE_SERIAL_NUMBER MAC_ADDRESS MANUFACTURING_DATE VENDOR_NAME Description ID of the IRF member device. Device name. Serial number. MAC - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 163
display memory usage. Syntax display memory [ slot slot-number ] Views Any view Predefined user roles network-admin network-operator Parameters slot slot-number: Specifies an IRF member device by its ID. Without this option, the command displays memory usage for all member devices. Examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 164
notification statistics. Syntax display memory-threshold [ slot slot-number ] Views Any view Predefined user roles network-admin Parameters slot slot-number: Specifies an IRF member device by its ID. Without this option, the command displays the memory usage thresholds and memory usage notification - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 165
number of notifications sent: 0 display scheduler job Use display scheduler job to display job configuration information. Syntax display scheduler job [ job-name ] Views Any view Predefined user the command displays the configuration information of all jobs. Examples # Display the configuration - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 166
47 2012 Job output system-view System View: return to User View with Ctrl+Z. [Sysname]interface range ten-gigabitethernet1/1/5 to ten-gigabitethernet1/1/7 [Sysname-if-range]shutdown Table 22 Command output Field Logfile Size Schedule name Execution time Completion time Job output - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 167
schedule [ schedule-name ] Views Any view Predefined user roles network-admin network-operator Parameters schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If no schedule is specified, the command displays information about all schedules. Examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 168
execution time is specified, this field is not displayed. Number of times the schedule has been executed. If the schedule command. display system-working-mode Use display system-working-mode to display the current system working mode. Syntax display system-working-mode Views Any view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 169
number ] Views Any view Predefined user roles network-admin network-operator Parameters interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface is specified, this command Transceiver type and port configuration mismatch Remarks Received signals - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 170
port configuration mismatch The type of the transceiver module does not match the port configuration. Transceiver type not supported by port hardware The port does not support loss of signal RX power low Table 25 Command output Field transceiver current alarm information RX loss -number ] 163 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 171
Views Any view Predefined user roles network-admin network-operator Parameters interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface is specified, this command displays the current measured values of the digital diagnosis parameters for - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 172
type and number. If no interface is specified, this command displays the key : NO Vendor Name : HP Table 27 Command output Field transceiver information Transceiver (in nm) of the transmit laser. If the transceiver supports multiple wavelengths, every two wavelength values are separated by a - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 173
interface [ interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface is specified, this command displays part of the electronic - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 174
display version HP Comware Software, Version 7.1.035, Release 2306 Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. HP 6125XLG Blade Switch uptime is 0 weeks, 0 days, 2 hours, 24 minutes Last reboot reason : Power on Boot image: flash:/6125xlg-cmw710-boot-r2306.bin Boot - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 175
software image is different from the old one. Related commands reset version-update-record fan prefer-direction Use fan prefer-direction to configure the preferred airflow direction. Use undo fan prefer-direction to restore the default. Syntax fan prefer-direction slot slot-number { power-to-port - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 176
-direction port-to-power Related commands display fan header Use header to create a banner. Use undo header to clear a banner. Syntax header { legal | login | motd | shell } text undo header { legal | login | motd | shell } Default No banner is configured. Views System view Predefined user roles - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 177
command. Because it is the starting and ending character, the percentage sign is not included in the banner. # Test the configuration by using Telnet. The login banner appears only when password job-name Default No job is assigned to a schedule. Views Schedule view Predefined user roles network- - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 178
commands • scheduler job • scheduler schedule memory-threshold Use memory-threshold to set free-memory thresholds. Use undo memory-threshold to restore the defaults. Syntax memory-threshold [ slot slot-number : 128 MB. Views System view Predefined user roles network-admin Parameters minor minor-value - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 179
notification and sends it to affected service modules or processes so they can take responsive actions. For more information about the conditions and rules for generating alarm notifications and alarm-removed notifications, see Fundamentals Configuration Guide. Examples # Set the minor alarm, severe - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 180
reboot [ slot slot-number ] [ force ] Views User view Predefined user roles network-admin Parameters slot slot-number: Specifies an IRF member device. Without this option, the command reboots all IRF member devices. force: Reboots the device immediately without performing any software check. If this - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 181
be lost after the reboot, save current configuration? [Y/N]:n This command will reboot the device. Continue? [Y/N]:y Now rebooting, please wait... # Reboot the device immediately without performing any software check. reboot force This command will reboot the device. Continue? [Y/N]:y Now - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 182
logfile Default None Views User view Predefined user roles network-admin Examples # Clear job execution log information. reset scheduler logfile Related commands display scheduler logfile reset version-update-record Use reset version-update-record to clear the startup software image - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 183
Default No job exists. Views System view Predefined user roles network-admin Parameters job-name: Specifies the job name, a case-sensitive string of 1 to 47 characters. Usage guidelines A job can be referenced by multiple schedules. In job view, you can assign commands to the job. Examples # Create - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 184
configuration. Syntax scheduler reboot at time [ date ] undo scheduler reboot Default No reboot date or time is specified. Views User view Predefined user reboot interrupts network services. When the date command and the schedule reboot delay command overwrite each other, and whichever is configured - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 185
reboot delay time. Use undo scheduler reboot to remove the reboot schedule configuration. Syntax scheduler reboot delay time undo scheduler reboot Default No reboot delay time is specified. Views User view Predefined user roles network-admin Parameters time: Specifies the reboot delay time in the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 186
user roles network-admin Parameters schedule-name: Specifies the schedule name, a case-sensitive string of 1 to 47 characters. Usage guidelines You can schedule a job to have the device automatically run a command or a set of commands without administrative interference. To configure command commands - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 187
it to 10 seconds (T1=10) two seconds after the port is shut down (T=2), this port will be recovered 8 seconds later. If the detection timer is to restore the default. Syntax sysname sysname undo sysname Default The default device name is HP. Views System view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 188
device supports different features and might have different specifications for the supported features. For example, the FCOE function is supported only the execution time configuration for a schedule. Syntax time at time date undo time Default No execution time or date is specified for a schedule - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 189
command, the time once command, and the time repeating command overwrite one another. The most recently configured command takes effect. Examples # Configure time undo time Default No execution time or day is specified for a schedule. Views Schedule view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 190
next month, or the specified day in the next week. The time at command, the time once command, and the time repeating command overwrite one another, whichever is configured most recently takes effect. Examples # Configure the device to execute schedule saveconfig once at 15:00. system-view - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 191
undo time Default No execution time table is specified for a schedule. Views Schedule view Predefined user roles network-admin guidelines The time repeating [ at time [ date ] ] interval interval-time command configures the device to execute a schedule at an interval from the specified time on. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 192
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date 5 # Configure the device to execute schedule saveconfig at 8:00 a.m. on the last [Sysname-schedule-saveconfig] time repeating at 8:00 month-date last # Configure the device to execute schedule saveconfig at 8:00 a.m. every Friday and - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 193
Emergency shell commands Unless otherwise stated, a file name or path argument in this 1 to 511 characters. copy Use copy to copy a file. Syntax copy fileurl-source fileurl-dest Views User view Parameters fileurl-source: Specifies the name of the source file. fileurl-dest: Specifies the name for the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 194
Start to delete flash:/tt.cfg...Done. dir Use dir to display files or directories. Syntax dir [ /all ] [ file-url ] Views User view Parameters /all: Displays all files and subdirectories under the current directory, including hidden files, hidden directories, files moved from the current - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 195
2012 00:04:37 config.cfg 524288 KB total (514248 KB free) Table 31 Command output Field Description Directory of Current directory. 0 -rw- 26043 Jan 01 2012 37 config.mdb Information about a file or directory: • 0-Index number, automatically assigned by the system. • -rw--Attributes of the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 196
# Display information about the system.bin software package. display install package flash:/system.bin flash:/system.bin [Package Info] Vendor: HP Product: 6125XLG Service name: system Platform version: 7.1.035 Product version: Release 2306 Supported board: mpu [Component Info] Component - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 197
, and supports broadcast and multicast. Priority of the interface. Statistics for received packets, including: • Total number of received packets. • Number of erroneous packets. • Number of discarded packets. • Number of packets affected by queue overflow. • Number of packets affected by frame queue - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 198
• Total number of sent packets. • Number of erroneous packets. • Number of discarded packets. • Number of packets affected by queue overflow. • Number of packets affected by carrier errors. Number of packets that encountered collisions. Maximum number of frames allowed by each queue. Total number of - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 199
The route is cached. • D-The route is the default route learned through the ND protocol. • G-The destination the route. Number of times the route has been referenced by other route entries. Number of times the U 256 0 UC 0 2888 U 256 0 Table 35 Command output Use Iface 1 lo 1 lo 0 m-eth0 0 m- - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 200
by other route entries. Number of times the route has HP 6125XLG Blade Switch Software Version V200R001B02D024 HP 6125XLG Blade Switch uptime is 0 week, 0 day, 1 hour, 30 minutes Boot image: flash:/6125xlg-cmw710-boot-r2305.bin Boot image version: 7.1.035, Release 2306 HP 6125XLG Blade Switch - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 201
Usage guidelines Use the format command with caution. This command permanently deletes all files and directories password 123, download the 111.txt file, and save it to a local file named 222.txt. ftp 192.168.1.100 user test password 123 get 111.txt flash:/222.txt install load Use install - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 202
Comware system. install load flash:/system.bin Check service initialization completed, cost 5 seconds. Ondemand service initialization completed, cost 30 seconds. User interface con1 is available. Press ENTER to get started. interface m-eth0 Use interface m-eth0 to enter management Ethernet - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 203
undo ip address Default The management Ethernet interface has no IPv4 address. Views Management Ethernet interface view command multiple times, the most recent configuration takes effect. When the management Ethernet interface is manually shut down, removing the IP address or other configuration - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 204
or removing the IPv4 address of the management Ethernet interface removes the port's IPv4 gateway configuration. If you execute this command multiple times, the most recent configuration takes effect. Examples # Configure the management Ethernet interface to use IPv4 gateway 192.168.1.5. - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 205
or removing the IPv6 address of the management Ethernet interface removes the port's IPv6 gateway configuration. If you execute this command multiple times, the most recent configuration takes effect. Examples # Configure the management Ethernet interface to use IPv6 gateway 2002::1. system - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 206
under the test directory. mkdir flash:/test/subtest Directory flash:/test/subtest created. Related commands • dir • rmdir more Use more to display the contents of a file. Syntax more file-url Views User view Parameters file-url: Specifies the Name of the file. Examples # Display the contents - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 207
view Parameters -c count: Specifies the number of ICMP echo requests to send, in the range of 1 to 2147483647. The default is 5. -s size: Specifies default is 56. ip-address: Specifies the IPv4 address of the destination in dotted decimal notation. Usage guidelines When you execute the ping command - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 208
Any view Parameters -c count: Specifies the number of ICMPv6 echo requests to send, in the range of 1 to 2147483647. The default is 5. -s size: Specifies the The default is 56. Ipv6-address: Specifies the IPv6 address of the destination. Usage guidelines When you execute the ping ipv6 command, the - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 209
Examples # Display the current path. pwd flash: Related commands • system-view • interface m-eth0 quit Use quit to return to the upper level view. Syntax quit Default After entering emergency shell mode, the device is in user view. Views System view, management Ethernet interface view 202 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 210
Ethernet interface view to user view. [boot-m-eth0] quit [boot] quit reboot Use reboot to reboot the current member device. Syntax reboot Views User and subdirectories under the directory. To delete files, use the delete command. Examples # Delete the mydir directory. rmdir flash:/mydir - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 211
Ethernet interface. Syntax shutdown undo shutdown Default The management Ethernet interface is active. Views Management Ethernet interface view Examples # Shut down the management Ethernet 192.168.100.128 [email protected]'s password: Last login: Thu Mar 24 14:05:23 2012 from 192.168.100.199 - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 212
Syntax system-view Default After entering emergency shell mode, the device is placed in user view. Views User view Examples # Switch from user view to system view. system-view [boot] Related commands quit telnet Use telnet to log in to a Telnet server. Syntax telnet { server-ipv4-address | - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 213
again later. Examples # Log in to TFTP server 192.168.1.100, download the 111.bin file, and save it to a local file named 222.bin. tftp 192.168.1.100 get 111.bin flash:/222.bin # Upload the startup configuration file named startup.cfg to TFTP server 192.168.1.100. tftp - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 214
, you can use the tclsh command to enter Tcl configuration view, where you can execute the following commands: • All Tcl 8.5 commands. • Comware commands. In this case, the Tcl configuration view is equivalent to the user view. You can use Comware commands in Tcl configuration view in the same way - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 215
Examples # Return from Tcl configuration view to user view. tclquit Related commands tclsh Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.com/support Before contacting HP, collect the following - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 216
• HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn Conventions This section describes the conventions used in this documentation set. Command - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 217
hardware or software. An switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 218
-configuration,128 display default-configuration,129 display device,153 display device manuinfo,154 display diagnostic-information,155 display ftp client source,78 display ftp-server,65 display ftp-user,66 display history-command,6 display history-command all,7 display hotkey,7 display install - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 219
display saved-configuration,131 display user-interface,23 ftp,78 ftp,194 ftp client ipv6 source,80 ftp client source,79 ftp ipv6,81 ftp server acl,68 ftp server enable,69 ftp timeout,69 G get,82 gunzip,113 gzip,114 H header,169 help,83 history-command max-size,24 hotkey,9 I idle-timeout,24 install - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 220
29 sha256sum,119 shell,30 shutdown,204 shutdown-interval,179 speed,31 ssh2,204 startup saved-configuration,137 status,96 stopbits,31 Subscription service,208 super,59 super authentication-mode,60 super password,61 sysname,180 system,97 system-view,204 system-view,11 system-working-mode,181 T tclquit - HP 6125XLG | R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 221
time at,181 time once,182 time repeating,183 U undelete,120 user,98 user-interface,37 user-role,38 V verbose,98 vlan policy deny,63 vpn-instance policy deny,64 W Websites,209 214
HP 6125XLG Blade Switch
Fundamentals
Command Reference
Part number: 5998-3730
Software version: Release 2306
Document version: 6W100-20130912