HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 202
interface m-eth0, System view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Parameters system-package: Specifies the name of the system image, a case-insensitive string of 1 to 63 characters. This file must be saved in the root directory of the current member device's storage medium, with the extension .bin. The file name must indicate the storage medium and cannot contain slot information, for example, flash:/startup-system.bin. Examples # Load a system image and start the Comware system. install load flash:/system.bin Check package flash:/system.bin ... Extracting package ... Loading... System application is starting... Set bootargs. CPIO Length: 0x96e7d8. cpio=0x96e7d8@0x13000000 CPIO Length: 0x96e7d8. Starting application at 0x02000000 ..HA_Register OK, ulModuleID = 252772352, ulS ubID = 6.HA_Register OK, ulModuleID = 254803968, ulSubID = 0.HA_Register OK, ulM oduleID = 252706816, ulSubID = 0.HA_Register OK, ulModuleID = 255983616, ulSubID = 2.HA_Register OK, ulModuleID = 256442368, ulSubID = 0.HA daemon start as 1 (b uild Jul 29 2011 11:50:56). System service initialization completed, cost 28 seconds. Autorun service initialization completed, cost 5 seconds. Ondemand service initialization completed, cost 30 seconds. User interface con1 is available. Press ENTER to get started. interface m-eth0 Use interface m-eth0 to enter management Ethernet interface view. Syntax interface m-eth0 Views System view Usage guidelines In management Ethernet interface view, you can assign an IP address to the port and specify a gateway. Examples # Enter management Ethernet interface view. system-view [boot] interface m-eth0 [boot-m-eth0] 195