HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 189

Views Schedule view Predefined user roles network-admin Parameters time: Specifies the schedule execution time in the format hh:mm, where hh is in the range of 0 to 23, and mm is in the range of 0 to 59. date: Specifies the schedule execution date in the format MM/DD/YYYY or YYYY/MM/DD. The YYYY value is in the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value range of DD depends on the month value. Usage guidelines The specified time (date plus time) must be later than the current system time. The time at command, the time once command, and the time repeating command overwrite one another. The most recently configured command takes effect. Examples # Configure the device to execute schedule saveconfig at 01:01 a.m. on May 11, 2013. system-view [Sysname] scheduler schedule saveconfig [Sysname-schedule-saveconfig] time at 1:1 2013/05/11 Related commands scheduler schedule time once Use time once to specify one or more execution days and the execution time for a one-time schedule. Use undo time to remove the execution time configuration for a schedule. Syntax time once at time [ month-date month-day | week-day week-day& ] time once delay time undo time Default No execution time or day is specified for a schedule. Views Schedule view Predefined user roles network-admin Parameters at time: Specifies the execution time in the format hh:mm, where hh is in the range of 0 to 23, and mm is in the range of 0 to 59. 182