HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 203
ip address, ip gateway, Related commands, Syntax, Default, Views, Parameters, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Related commands quit ip address Use ip address to assign an IPv4 address to the management Ethernet interface. Use undo ip address to restore the default. Syntax ip address ip-address { mask-length | mask } undo ip address Default The management Ethernet interface has no IPv4 address. Views Management Ethernet interface view Parameters ip-address: Specifies an IPv4 address in dotted decimal notation. mask-length: Specifies the length of the subnet mask, in the range of 0 to 31. mask: Specifies the subnet mask in dotted decimal notation. Usage guidelines The management Ethernet interface can have only one IPv4 address. If you execute this command multiple times, the most recent configuration takes effect. When the management Ethernet interface is manually shut down, removing the IP address or other configuration of the interface activates the interface at the same time. The IP address assigned to the management Ethernet interface must be different from the IP addresses of the other devices on the network. Examples # Assign IPv4 address 192.168.1.1/24 to the management Ethernet interface. system-view [boot] interface m-eth0 [boot-m-eth0] ip address 192.168.1.1 24 ip gateway Use ip gateway to specify an IPv4 gateway for the management Ethernet interface. Use undo ip gateway to restore the default. Syntax ip gateway ip-address undo ip gateway 196