HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 212
telnet, tftp, to abort the login attempt and try again later.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Syntax system-view Default After entering emergency shell mode, the device is placed in user view. Views User view Examples # Switch from user view to system view. system-view [boot] Related commands quit telnet Use telnet to log in to a Telnet server. Syntax telnet { server-ipv4-address | ipv6 server-ipv6-address } Views User view Parameters server-ipv4-address: Specifies the IPv4 address of the Telnet server in dotted decimal notation. server-ipv6-address: Specifies the IPv6 address of the Telnet server. Usage guidelines If the Telnet server does not respond, you can press Ctrl+K to abort the login attempt and try again later. Examples # Telnet to Telnet server 192.168.100.1. telnet 192.168.100.1 tftp Use tftp to log in to a TFTP server. Syntax tftp server-ipv4-address { get remote-file local-file | put local-file remote-file } tftp ipv6 server-ipv6-address { get remote-file local-file | put local-file remote-file } Views User view Parameters server-ipv4-address: Specifies the IPv4 address of the TFTP server in dotted decimal notation. 205