HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 37
shell, Parameters, Usage guidelines, Examples, Related commands, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Parameters hash: Sets a hashed password. simple: Sets a plaintext password. password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be a string of 1 to 16 characters. If hash is specified, it must be a string of 1 to 110 characters. Usage guidelines This command is not supported in FIPS mode. Whether you specify the hash or simple keyword for the command, the password is hashed before being saved to the configuration file. Examples # Set the password for password authentication on user interface AUX 0 to hello. system-view [Sysname] user-interface aux 0 [Sysname-ui-aux0] authentication-mode password [Sysname-ui-aux0] set authentication password simple hello When you log in again to user interface AUX 0, you must enter the password hello to pass authentication. Related commands authentication-mode shell Use shell to enable the terminal service for a user interface. Use undo shell to disable the terminal service for a user interface. Syntax shell undo shell Default The terminal service is enabled on all user interfaces. Views VTY user interface view Predefined user roles network-admin Usage guidelines You cannot disable the terminal service on the user interface you are using. To configure the device to act as a Telnet or SSH server on a user interface, you cannot configure the undo shell command for the user interface. Examples # Disable the terminal service for user interface VTY 0 through VTY 4 so no user can log in to the device through the user interfaces. 30