HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 69

undo super password [ role rolename ] In FIPS mode: super password [ role rolename ] undo super password [ role rolename ] Default No password is set for a user role. Views System view Predefined user roles network-admin Parameters role rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must exist in the system. If no user role is specified, this command sets a password for user role network-admin. hash: Sets a hashed password. simple: Sets a plaintext password. This password will be saved in hashed text for security purposes. password: Specifies the password string. This argument is case sensitive. • In non-FIPS mode, if simple is specified, it must be a string of 1 to 63 characters. If hash is specified, it must be a string of 1 to 110 characters. • In FIPS mode, the password must be a string of 15 to 63 characters, and must contain 4 character types including digits, uppercase letters, lowercase letters, and special characters. Usage guidelines If you do not specify any parameters, you specify a plaintext password in the interactive mode. The FIPS mode supports only the interactive mode for setting a password. Set a password if you configure local password authentication for temporary user role authorization. It is a good practice to specify different passwords for different user roles. Examples # Set the password to 123456TESTplat&! for the user role network-operator. system-view [Sysname] super password role network-operator simple 123456TESTplat&! # Set the password to 123456TESTplat&! in the interactive mode for the user role network-operator system-view [Sysname] super password role network-operator Password: Confirm : Related commands super authentication-mode 62