HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 147
boot-loader update
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
This command overwrites the entire startup software image list. To add new startup feature images, specify all feature package files, including feature package files in the old startup software image list. The new startup software image list will contain only the feature package files that are specified in the command. Examples # Specify flash:/all.ipe as the backup startup image file for IRF member device 1. boot-loader file flash:/all.ipe slot 1 backup Images in IPE: boot.bin system.bin This command will set the backup startup software images. Continue? [Y/N]:Y Add images to target slot. flash:/boot.bin already exists on slot 1. flash:/system.bin already exists on slot 1. Overwrite it? [Y/N]:y The specified file list will be used as the backup startup software images at the next reboot on slot 1. Related commands display boot-loader boot-loader update Use boot-loader update to synchronize startup images from the master to a subordinate device. Syntax boot-loader update slot slot-number Views User view Predefined user roles network-admin Parameters slot slot-number: Specifies the IRF member ID of a subordinate device. Usage guidelines The startup images synchronized to the subordinate device are set as main startup images, regardless of whether the source startup images are main or backup. If the master device has started up with main startup images, its main startup images are synchronized to the subordinate device, regardless of whether any main startup image has been re-specified. If the master device has started up with backup startup images, its backup startup images are synchronized to the subordinate device, regardless of whether any backup startup image has been re-specified. Startup image synchronization fails if any software image being synchronized is not available or has been corrupted. 140