HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 155

If a command uses the ID of an existing command, the existing command is replaced. The system does not check the validity of the command argument. You must make sure the command is supported by the device, is input in the correct format, and uses valid values. Otherwise, the command cannot be executed automatically. Examples # Assign commands to job backupconfig to back up configuration file startup.cfg to the TFTP server at 192.168.100.11. system-view [Sysname] scheduler job backupconfig [Sysname-job-backupconfig] command 2 tftp 192.168.100.11 put flash:/startup.cfg backup.cfg Related commands scheduler job copyright-info enable Use copyright-info enable to enable displaying the copyright statement. Use undo copyright-info enable to disable displaying the copyright statement. Syntax copyright-info enable undo copyright-info enable Default The copyright statement is displayed. Views System view Predefined user roles network-admin Examples # Enable displaying the copyright statement. system-view [Sysname] copyright-info enable • When a Telnet user logs in, the following statement appears: * Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. * * Without the owner's prior written consent, * * no decompiling or reverse-engineering shall be allowed. * • When a console user quits user view, the following message appears: * Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. * 148