HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 205
ipv6 gateway, mkdir, Examples, Syntax, Default, Views, Parameters, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Examples # Assign IPv6 address 2001::1/64 to the management Ethernet interface. system-view [boot] interface m-eth0 [boot-m-eth0] ipv6 address 2001::1 64 ipv6 gateway Use ipv6 gateway to specify an IPv6 gateway for the management Ethernet interface. Use undo ipv6 gateway to restore the default. Syntax ipv6 gateway link-local undo ipv6 gateway Default The management Ethernet interface has no IPv6 gateway configured. Views Management Ethernet interface view Parameters link-local: Specifies the Link-local address of an IPv6 gateway. Usage guidelines When the device needs to communicate with a device on a remote IPv6 network, you must specify an IPv6 gateway for the management Ethernet interface. The IPv6 gateway address must be on the same segment as the IPv6 address of the management Ethernet interface. Changing or removing the IPv6 address of the management Ethernet interface removes the port's IPv6 gateway configuration. If you execute this command multiple times, the most recent configuration takes effect. Examples # Configure the management Ethernet interface to use IPv6 gateway 2002::1. system-view [boot] interface m-eth0 [boot-m-eth0] ipv6 gateway 2002::1 mkdir Use mkdir to create a directory on a storage medium. Syntax mkdir directory Views User view 198