HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 88
ftp ipv6, Related commands, Syntax, Views, Predefined user roles, Parameters, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Related commands ftp ipv6 ftp ipv6 Use ftp ipv6 to log in to the FTP server and enter FTP client view. Syntax ftp ipv6 [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ source { ipv6 source-ipv6-address | interface interface-type interface-number } ] [ -i interface-type interface-number ] ] Views User view Predefined user roles network-admin Parameters ftp-server: Specifies the IPv6 address or host name of an FTP server. A host name can be a case-insensitive string of 1 to 253 characters. service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21. source ipv6 source-ipv6-address: Specifies the source IPv6 address for sent FTP packets. This address must be an IPv6 address that has been configured on the device. source interface interface-type interface-number: Specifies a source interface by its type and number. This parameter can be used only when the FTP server address is a link local address and the specified output interface has a link local address. For more information about link local addresses, see Layer 3-IP Services Configuration Guide. vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the FTP server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the FTP server is on the public network, do not specify this option. -i interface-type interface-number: Specifies an output interface by its type and number. This parameter can be used only when the FTP server address is a link local address and the specified output interface has a link local address. Usage guidelines This command is only applicable to IPv6 networks. If no parameters are specified, this command enters the FTP client view. If the FTP server parameters are specified, you are prompted to enter the username and password for logging in to the FTP server. Examples # Log in to the FTP server 2000::154. ftp ipv6 2000::154 Connected to 2000::154 (2000::154). 220 FTP service ready. User (2000::154): root 331 Password required for root. 81