HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 16
hotkey, quit, To facilitate CLI operation
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
hotkey Use hotkey to assign a command to a configurable hotkey. Use undo hotkey to restore the default. Syntax hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } command undo hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } Default • ctrl_g: display current-configuration (display the running configuration). • ctrl_l: display ip routing-table (display the IPv4 routing table information). • ctrl_o: undo debugging all (disable all debugging functions). • ctrl_t: No command is assigned to this hotkey. • ctrl_u: No command is assigned to this hotkey. Views System view Predefined user roles network-admin Parameters ctrl_g: Assigns a command to Ctrl+G. ctrl_l: Assigns a command to Ctrl+L. ctrl_o: Assigns a command to Ctrl+O. ctrl_t: Assigns a command to Ctrl+T. ctrl_u: Assigns a command to Ctrl+U. command: Specifies the command to be assigned to the hotkey. Usage guidelines To facilitate CLI operation, the system defines some hotkeys and provides five configurable command hotkeys. Pressing a hotkey executes the command assigned to the hotkey. To display system-defined and configurable hotkeys, use the display hotkey command. Examples # Assign the display tcp status command to the hotkey Ctrl+T. system-view [Sysname] hotkey ctrl_t display tcp status Related commands display hotkey quit Use quit to return to the upper-level view. 9