HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 130
archive configuration location - irf configuration
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
• archive configuration max • display archive configuration archive configuration location Use archive configuration location to configure the directory and file name prefix for archiving the running configuration. Use undo archive configuration location to restore the default. Syntax archive configuration location directory filename-prefix filename-prefix undo archive configuration location Default No configuration archive directory or configuration archive file name prefix has been set. Views System view Predefined user roles network-admin Parameters directory: Specifies a configuration archive directory, a case-insensitive string of 1 to 63 characters. The directory must take the format storage-medium-name:/folder-name. This directory must already exist on the master, and its directory name must not include member ID information. filename-prefix: Specifies a file name prefix for configuration archives, a case-insensitive string of 1 to 30 characters. Valid characters are letters, digits, underscores (_), and hyphens (-). Usage guidelines Before archiving the running configuration, either manually or automatically, you must configure a directory and file name prefix for configuration archives. In an IRF fabric, the configuration archive function saves the running configuration only on the master device. To make sure the system can archive the running configuration after a master/subordinate switchover, create the directory on all IRF members. Configuration archives take the file name format prefix_serial number.cfg, for example, 20080620archive_1.cfg and 20080620archive_2.cfg. The serial number is automatically assigned from 1 to 1000, increasing by 1. After the serial number reaches 1000, it restarts from 1. After you change the file directory or file name prefix, or reboot the device, the old configuration archives are regarded as common configuration files, the configuration archive counter resets, and the display archive configuration command no longer displays them. The serial number for new configuration archives starts at 1. The undo archive configuration location command not only removes the configuration archive directory and file name prefix settings but also disables the configuration archive function (both manual and automatic methods), restores the default settings of the archive configuration interval and archive configuration max commands, and clears all configuration archives. 123