HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 12
display command-alias, Predefined user roles, Parameters, Usage guidelines, Examples, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Predefined user roles network-admin network-operator Parameters command: Specifies the keywords and arguments of a display command. To display available keywords and arguments, enter display ?. filename: Specifies the name of the file that is used to save the output. Usage guidelines The display commands show the configuration, statistics, and states of the device. You can use display >> to save the output from a display command for management purposes. If the specified file does not exist, the system creates the file and then saves the output to the file. If the file already exists, the system appends the output to the end of the file. Examples # Append the VLAN 999 settings to the end of the vlan.txt file. display vlan 999 >> vlan.txt # Check the content of the vlan.txt file. more vlan.txt VLAN ID: 1 VLAN type: Static Route interface: Not configured Description: VLAN 0001 Name: VLAN 0001 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/5 VLAN ID: 999 VLAN type: Static Route interface: Configured IP address: 192.168.2.1 Subnet mask: 255.255.255.0 Description: For LAN Access Name: VLAN 0999 Tagged ports: None Untagged ports: Ten-GigabitEthernet1/1/6 display command-alias Use display command-alias to display the status of the command keyword alias function and the configured command keyword alias. Syntax display command-alias 5