HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 112
tftp-server acl, Views, Predefined user roles, Parameters, Usages guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Views System view Predefined user roles network-admin Parameters interface interface-type interface-number: Specifies the source interface by its type and number. The IPv6 address configured on the source interface is the source address of sent TFTP packets. Make sure the interface is up. Otherwise, the transmission fails. ip source-ip-address: Specifies the source IPv6 address of sent TFTP packets. It must be the IPv6 address of an interface in up state. Otherwise, the transmission fails. Usages guidelines If you execute this command multiple times, the most recent configuration takes effect. The source IPv6 address specified with the tftp ipv6 command takes precedence over the one specified with the tftp client ipv6 source command. The source IPv6 address specified with the tftp client ipv6 source command applies to all TFTP connections while the one specified with the tftp ipv6 command applies only to the current TFTP connection. Examples # Specify source IPv6 address 2000::1 for sent TFTP packets. system-view [Sysname] tftp client ipv6 source ipv6 2000::1 Related commands tftp ipv6 tftp-server acl Use tftp-server acl to use an ACL to control the device's access to TFTP servers in an IPv4 network. Use undo tftp-server acl to restore the default. Syntax tftp-server acl acl-number undo tftp-server acl Default No ACL is used to control the device's access to TFTP servers. Views System view Predefined user roles network-admin Parameters acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999. 105