HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 44
terminal type, user-interface
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Examples # Enable the Telnet server function. system-view [Sysname] telnet server enable terminal type Use terminal type to specify the terminal display type. Use undo terminal type to restore the default. Syntax terminal type { ansi | vt100 } undo terminal type Default The terminal display type is ANSI. Views User interface view Predefined user roles network-admin Parameters ansi: Specifies the terminal display type ANSI. vt100: Specifies the terminal display type VT100. Usage guidelines The device supports two terminal display types: ANSI and VT100. HP recommends you set the display type to VT100 on both the device and the configuration terminal. If either side uses the ANSI type, a display problem such as cursor positioning error might occur when a command line has more than 80 characters. Examples # Set the terminal display type to VT100. system-view [Sysname] user-interface vty 0 [Sysname-ui-vty0] terminal type vt100 user-interface Use user-interface to enter one or multiple user interface views. Syntax user-interface { first-number1 [ last-number1 ] | { aux | console | vty } first-number2 [ last-number2 ] } Views System view 37