HP 6125XLG R2306-HP 6125XLG Blade Switch Fundamentals Command Reference - Page 36
set authentication password, Parameters, Usage guidelines, Examples, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Parameters all: Specifies all user interfaces. number1: Specifies the absolute number of a user interface, in the range of 0 to 35. aux: Specifies the AUX user interface. console: Specifies the console user interface. vty: Specifies the VTY user interface. number2: Specifies the relative number of a user interface, in the range of 0 to 9 for a console/AUX interface or 0 to 15 for a VTY user interface. Usage guidelines To end a message, press Enter. To cancel a message and return to user view, press Ctrl+C. Examples # Before you restart the device, send a notification to VTY 1 to inform the user. send vty 1 Input message, end with Enter; abort with CTRL+C: Note please, I will reboot the system in 3 minutes. Send message? [Y/N]:y The message should appear on the screen of the user's configuration terminal, as shown in the following example: [Sysname] *** *** ***Message from vty0 to vty1 *** Your attention, please. I will reboot the system in 3 minutes. set authentication password Use set authentication password to set a password for password authentication. Use undo set authentication password to remove the password. Syntax set authentication password { hash | simple } password undo set authentication password Default No password is set for password authentication. Views User interface view Predefined user roles network-admin 29