HP Z200 HP Z200 SFF Workstation Maintenance and Service Guide - Page 14
Processor technology, Memory technology, Graphics, - quad core
View all HP Z200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
The following figure shows the typical system board block diagram. Figure 1-1 System board block diagram NOTE: The x1 and x16 designators describe the mechanical length of the slot. The number in parentheses lists the number of electrical PCIe lanes routed to the expansion slot. For example, x16(4) means that the expansion slot is mechanically a x16 length connector, with four PCIe lanes connected. Processor technology This computer uses the Intel® Series 3450 chipset, including support of Quad Core Intel Xeon™ processors and processors of up to 95W. These processors incorporate an integrated 2-channel memory controller, microarchitecture improvements, integrated graphics, and L3 caching to improve performance. In addition, the computer uses Intel DMI interface to connect the processor to the I/O controller. Memory technology The computer dual in-line memory modules (DIMMs) are based on DDR3 1333MHz technology, and are error checking and correcting (ECC). Two direct-attach memory channels permit low latency access and fast data transfer to improve performance. System memory sizes up to 16GB (using 4GB DIMMs) are supported. NOTE: To optimize performance, distribute the DIMMs across both memory channels. See Memory on page 105 for more information. Graphics The system supports multiple graphics cards as long as the total power usage of all graphics cards is less than 45W, and the total of all I/O power usage is less than 80W. 2 Chapter 1 Product overview ENWW