HP Z200 HP Z200 SFF Workstation Maintenance and Service Guide - Page 173

Table 6-9 POST error messages (continued) Screen message Probable cause Recommended action 1803-Processor feature set is insufficient for current system settings Processor feature set is insufficient for current system settings. The BIOS settings do not match the support provided by the processor Change the BIOS settings or upgrade the processor. 1804-A processor feature A processor feature is incompatible and the memory configuration with the memory configuration. are incompatible Restore the previous memory configuration. ERROR: Invalid 1394 GUID (Invalid electronic serial number) No electronic serial number is stored To assign a serial number , select Security >System with the system. IDs in the Computer Setup (F10) Utility. ERROR: Invalid electronic serial number (no number) No electronic serial number is stored To assign a serial number , select Security >System with the system IDs in the Computer Setup (F10) Utility. ERROR: An unsupported Unsupported processor detected. processor is installed. System halted Replace the processor. ERROR: A processor requiring Unsupported processor detected. too much power is installed. System halted Replace the processor. Invalid electronic serial number Incorrect serial number registered in To assign a serial number , select Security >System the system. IDs in the Computer Setup (F10) Utility. Network Server Mode Active Keyboard not detected. and No Keyboard Attached Verify that a functioning keyboard is attached to the computer. Processor initialization fails Processor defective. Replace the processor. ENWW Diagnostic codes and errors 161