HP Z200 HP Z200 SFF Workstation Maintenance and Service Guide - Page 8

Tools and software requirements 64 Special handling of components 64 Cables and connectors 64 Hard drives ...65 Lithium coin cell battery 65 Customer Self-Repair ...65 Removing and installing components 66 Component locations ...66 Predisassembly procedures 68 Disassembly order ...69 Removing the cable lock (optional 69 Access panel ...71 Removing the access panel 71 Installing the access panel 71 Bezel ...72 Removing the front bezel 72 Installing the front bezel 72 Front bezel security 73 Access panel sensor (optional 74 Removing the access panel sensor 74 Installing the access panel sensor 75 Access panel solenoid lock 76 Removing the access panel solenoid lock 76 Installing the access panel solenoid lock 76 Removing and installing drives 76 Predisassembly for drives 77 Follow all general predisassembly procedures 77 Perform a data backup 77 Gather required tools 77 Verify drive position and information 77 Remove bezel blanks 78 Locate system board drive connections 78 Locate extra guide screws 79 Carefully handle hard disk drives 80 Removing an optical drive 80 Installing an optical drive 82 Removing a hard disk or media card from the drive cage 85 Installing a hard drive or media card reader into the drive cage 87 Removing and replacing the primary hard drive 88 Cable management ...93 Power connections 94 Using the Small Form Factor Computer in a Tower Orientation 95 Front panel I/O device assembly 96 Removing the front panel I/O device assembly 96 viii ENWW