HP Z200 HP Z200 SFF Workstation Maintenance and Service Guide - Page 85
Front bezel security, CAUTION,
View all HP Z200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Front bezel security You can lock the front bezel in place by installing a security screw provided by HP. To install the security screw: 1. Prepare the computer for servicing by following the Predisassembly procedures on page 68. CAUTION: Failure to follow the predisassembly procedures can result in equipment damage or data loss. 2. Remove the access panel (see Removing the access panel on page 71). 3. Remove the front bezel (see Removing the access panel on page 71). 4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the bezel. Figure 5-5 Retrieving the Front Bezel Security Screw 5. Replace the front bezel. ENWW Removing and installing components 73
Front bezel security
You can lock the front bezel in place by installing a security screw provided by HP. To install the security
screw:
1.
Prepare the computer for servicing by following the
Predisassembly procedures
on page
68
.
CAUTION:
Failure to follow the predisassembly procedures can result in equipment damage or
data loss.
2.
Remove the access panel (see
Removing the access panel
on page
71
).
3.
Remove the front bezel (see
Removing the access panel
on page
71
).
4.
Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 5-5
Retrieving the Front Bezel Security Screw
5.
Replace the front bezel.
ENWW
Removing and installing components
73