Netgear FS752TPS FS752TS Setup Manual - Page 103
CST Port Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
FS700TS Smart Switch Software Administration Manual • Root Path Cost - Displays the cost of the path from this bridge to the Root Bridge. 2. Enter the Bridge Priority in the provided field. 3. Select Hello Time, Max Age or Forward Delay and enter the value in the provided field. 4. Click APPLY to update the device. CST Port Configuration To configure CST ports on the device: 1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port Configuration screen displays: Figure 4-19 The CST Port Configuration screen contains the following fields: • Interface - Displays the port or LAG for which the STP information is displayed. • STP Status - Select the STP status on the interface. The possible field values are: - Enabled - Enable STP on the interface. - Disabled - Disable STP on the interface. Configuring Switching Settings v1.0, September 2007 4-27