Netgear FS752TPS FS752TS Setup Manual - Page 53
PoE Port Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
FS700TS Smart Switch Software Administration Manual • Power Status - Displays the online power source status. The possible field values are: - On - The power supply unit is functioning. - Off - The power supply unit is not functioning. - Faulty - The power supply unit is functioning, but an error has occurred. For example, a power overload or a short circuit. • Nominal Power - Displays the actual amount of power the device can supply. The field value is displayed in Watts. • Consumed Power - Displays the amount of the power used by the connecting device. The field value is displayed in Watts. • System Usage Threshold - Enter the percentage of power consumed before an alarm is generated. The field value is 1-99 percent. The default is 95 percent. • Traps - Select the PoE device trap state. The possible field values are: - Enable - Enable PoE traps on the device. - Disable - Disable PoE traps on the device. This is the default value. 2. Enter the System Usage Threshold in the provided field. 3. Select the Traps mode from the list in the provided field. 4. Click APPLY to update the device. PoE Port Configuration The PoE Interface Configuration screen contains system PoE information for enabling PoE on the device, monitoring the current power usage, and enabling PoE traps. Managing System Settings v1.0, September 2007 3-19