Netgear FS752TPS FS752TS Setup Manual - Page 84
Advanced, LAG Configuration
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
FS700TS Smart Switch Software Administration Manual 2. Select the LAG ID and LAG Type. 3. Click on the unit's gold button. The unit's port panel displays. 4. Select the ports to be members of the LAG. 5. Click APPLY to update the device. 6. Click CURRENT MEMBERS. The Current Members window opens and displays the member ports included in the LAG: Figure 4-4 Advanced The LAG Advanced menu contains the following options: • "LAG Configuration" • "LAG Membership" • "LACP" • "LACP Port Priority" LAG Configuration The Advanced LAG Configuration screen contains fields for configuring LAG parameters. The system supports 8 LAGs, and each LAG can contain up to 8 ports. 4-8 Configuring Switching Settings v1.0, September 2007
FS700TS Smart Switch Software Administration Manual
4-8
Configuring Switching Settings
v1.0, September 2007
2.
Select the
LAG ID
and
LAG Type
.
3.
Click on the unit’s gold button. The unit’s port panel displays.
4.
Select the ports to be members of the LAG.
5.
Click
APPLY
to update the device.
6.
Click
CURRENT MEMBERS
. The Current Members window opens and displays the
member ports included in the LAG:
Advanced
The LAG
Advanced
menu contains the following options:
•
“LAG Configuration”
•
“LAG Membership”
•
“LACP”
•
“LACP Port Priority”
LAG Configuration
The Advanced LAG Configuration screen contains fields for configuring LAG parameters. The
system supports 8 LAGs, and each LAG can contain up to 8 ports.
Figure 4-4